Download Command Center (GCC) Operating Instructions 4190
Transcript
This window asks you to please wait and displays the percentage of copied information completed. While this message is displayed, you should wait and not attempt to perform system actions. When the system informs you that the information is 100% copied, you can again use the system to perform desired actions. Back Up a Volume To back up a volume, click on the Backup Button at the Historical Log Volume Operations Window. When you click on this button, a window similar to the one shown in Figure 22 is displayed. Figure 22 The Backup Volume Window At this window, enter the filename that you want the volume to be backed up to and then place the appropriate floppy disk in the A: drive. After placing the floppy disk in the A: drive click on the OK button. After you click on the OK button, the system starts writing information to the A: drive and a window similar to the one shown in Figure 23 is displayed. Figure 23 Percent Backed Up Window This window asks you to please wait and displays the percentage of copied information completed. While this message is displayed, you should wait and not attempt to perform system actions. When the system informs you that the information is 100% copied, you can again use the system to perform desired actions. 14