Download Operating Instructions - FTP Directory Listing
Transcript
Appendix Projection dimensions calculation methods If the screen size (diagonal) is SD (m), then the following formula is used to calculate the projection distance for the wide lens position (LW) and the projection distance for the telephoto lens position (LT). 4:3 H1 SH SD LW/LT PT-LB50NTE/PT-LB50E PT-LB50SE SW LW=0.0307xSD/0.0254-0.031 LT=0.0371xSD/0.0254-0.029 LW=0.0304xSD/0.0254-0.029 LT=0.0368xSD/0.0254-0.041 For 16:9 aspect ratios, the following formula can be used to calculate the projection distance. PT-LB50NTE/PT-LB50E PT-LB50SE LW=0.0335xSD/0.0254-0.0315 LT=0.0405xSD/0.0254-0.0365 LW=0.0332xSD/0.0254-0.032 LT=0.0401xSD/0.0254-0.038 *The values obtained from the formulas above are approximate. Others NOTE: B If 4:3 images are projected onto a 16:9 screen that has been set using the projection distance for a 16:9 screen, the 4:3 images will overflow the screen at the top and bottom. In such cases, set “ASPECT” to “S4:3”. (Refer to page 46 for details.) ENGLISH-67