Download Installation Manual

DELUXE WALL FURNACE
Unit Location
ROOM LOCATION
•
•
•
•
•
•
•
Face the heater down the room for
maximum performance (fig.1)
Corner placement restricts air movement,
allows cold spots (fig.2)
Long wall placement creates hot spot
center and cold corners (fig.3)
Ensure drapes, doors, etc, cannot cross
heater face.
Ensure large pieces of furniture are not
placed in front of the heater.
Unit Room Space Clearances
√
Sides: - Minimum 300mm or greater of
wall / mounting surface must be
maintained on each side of the unit.
√
Front: - Minimum clearance 3 metres
must be maintained to the opposite
wall.
√
Top: - Minimum of 200mm or greater
must be maintained.
Room must be adequately ventilated.
Refer Standard AS5601 (AG601)
Page 5