Download INSTALLATION MANUAL - E

Transcript
CCL-WBC-TOUCH-32
6.3.1
INSTALLATION MANUAL
CABLE INSERTION FROM ABOVE / BELOW
There are three insertion openings available at the top and bottom sides of the charge
point.
-
Before break out the required openings, take into account the space between
internal electronic and wires inside the charge point.
-
Use a hammer and a flathead screwdriver and carefully break out the cable
insertion openings.
TOP / BOTTOM VIEW
Do not make new holes in others parts of the
enclosure. Use only the cable insertion openings to
install the required electric pipes.
Install always cable glands to ensure IP protection
of the charge point.
14
© CIRCONTROL
www.circontrol.com