Download User Manual

MoTeC SDC3
12
Setup
Monitoring SDC3 Data
Live data from a connected SDC3 may be monitored using the File | Monitor Channels option (or the ‘M’ hotkey)
to open the Monitor Channels window.
Sending Firmware
The SDC3 firmware is user upgradeable from a PC connected to the MDC with the MoTeC UTC (USB To CAN)
or the MoTeC CAN cable.
To upgrade the firmware the SDC3 must be powered and connected to a PC with the SDC Manager software
installed. Use File | Send Firmware to send the current firmware to the SDC3.