Download User Manual - Serendipity Software
Transcript
Setting up the C5 Client The C5 Client will default to the Media Library window when it is run for the first time. In order to begin using C5, a Media Pack must be imported and a printer must be setup. It is assumed here that a Media Pack is available for use (either supplied by a Dealer or downloaded from the website). Configuring C5 1. A Media Pack must be loaded into C5. There are two ways this can be done: a. Drag and drop the C5 Media Pack file into the Media Packs list. The new media pack will load and be added to the list; or b. Click the + button at the bottom of the Media Pack list. This will open a file chooser window for you to navigate to the file for importing. 2. Once the Media Pack has been loaded, a message will appear on the screen to confirm. 3. The next step is to create a Printer for sending jobs to. Click on the Printers icon at the top of the interface. 4. Click on the + icon at the bottom of the list panel to add a new printer. 5. Select your Printer from the list of available printer drivers in the dropdown menu. 6. Select a calibrated Media to use with the printer from the dropdown menu. 7. Optionally rename the printer. Back/forward slashes will be replaced with spaces. Click OK when done. 8. Connect your printer to C5 by clicking on the newly created printer in the Printer List. Further options will now be enabled for you to configure settings and preferences. 9. Click on the Connections icon in the Options panel. 10. Select a printer connection method from the dropdown menu. Enter any relevant connection information, dependent upon what method is selected (TCP/IP, Local Port etc). 11. Once entered, click the Show All button to return to the main screen. All actions are automatically saved. 12. Configure any other printer settings (media size, rotation etc) if required and submit a job. You will be able to follow the job’s progress via the Jobs window. C5 Client User Manual – Version 5.2 11