1
Download SINUS PENTA USER MANUAL
Transcript
SINUS PENTA PROGRAMMING INSTRUCTIONS 53.5. Warnings Warning messages are displayed on the display/keypad. They are flashing messages that usually appear in line 1 or 2 of the first three lines of the display. NOTE Warnings are neither protections nor alarms, and are not stored to the fault list. Some warnings simply state what’s happening or suggest what to do when using the keypad. However, most of the warning messages are Coded warnings: they are displayed with letter “W” followed by two digits stating which warning is active at that moment. Example: W 3 2 O P E N Warning messages are detailed in the following section. 416/428 E N A B L E
