Download User Manual 2D + 4C

Setup Your Phone
Charge the battery with the PC data cable
To charge the battery via a computer,
1.
Plug the small end of the PC data cable into the
phone.
2.
Plug the large end (USB) into a USB port on a
computer.
3.
When the battery is fully charged (the battery icon
animation will stop), unplug the PC data cable from
the phone and then from the computer.
Insert a memory card (optional)
To store additional multimedia files, you must insert a
TM
memory card. Your device accepts microSD memory
cards (4 GB maximum). To insert a memory card,
1. Remove the battery cover and battery.
2. Slide and lift the memory card door.
3. Insert a memory card with the gold-colored
contacts facing down.
4. Close and slide the memory card door to lock it into
place.
5. Insert the battery and replace the battery cover.
4