Download User Manual - Serendipity Software
Transcript
Client The Client settings are custom options, specific to the Client currently being used. Settings may vary between Clients and Users connected to the same Server. The Client settings are divided into three (3) tabbed categories – General, Colour Management and Application Shortcuts. General • Internationalisation – Select your preferred language from those available. This displays all Client and log messages in the chosen language. The default is English. A restart is required if the language setting is changed. • Show Tooltips – Enable or disable tooltips within the Client. • Turn Sound FX Off – Check this to disable the sound effects. Sounds are used for things such as drag and drop, and error message alerts. • Undo Levels – Set the number of levels for Undo. The default is zero (0), which means no restriction. • Instant Messaging Nickname – Enter a nickname to use when accessing the Chatterbox application. • Memory Cache Maximum Size – Set the maximum cache size for the SoftProof application. The default is zero (0), where the Server chooses the default depending on system configuration. • Maximum Preview Resolution – Set the maximum preview resolution for SoftProof for both Imaged and Rendered options. The default is zero (0), which is the full job resolution of the output file. Colour Management • Choose Default Match ICC Profile – Select a default match ICC profile for accurate display of CMYK data. • CMS Dithering – Disabled by default. Use CMS Dithering for smoother results whenever conversion between 16 bits to 8 bits is required. • Calcheck Managed – Enabling this will display the current calibration status of the selected monitor. When selected, there will be a transparent icon showing a green tick or a red cross. This icon is shown in the corner of the monitor and is always on top of other windows. The icon can be moved to any corner by clicking and dragging close to the corner. Its status depends on the expiration time of the monitor calibration (as set below) and the Calcheck status. • Use Native Profile – Enable this to use the operating system defined ICC profile for colour management. The Client will use the monitor profile as setup for the operating system, i.e., Mac OS will use what is in the Display Preferences Colour tab, Windows will use the Display Adapter Settings. • The Client will use the monitor profile as setup for the operating system, i.e., Mac OS will use what is in the Display Preferences Colour tab, Windows will use the Display Adapter Settings. • Choose Monitor ICC Profile – Select a monitor ICC profile for the display the Client is running on. The profiles are used so any colour element viewed on the display is shown as accurately as possible. This includes SoftProof and any colour swatch. It is recommended the monitor be calibrated and set to the same match profile as is used for the softproofing Pagesetup. • Resolution – Choose the default resolution to use for the monitors. This is used in SoftProof for calculating various fit methods. Options include: o Use System Settings – The Client will calculate the system’s monitor resolution. o Custom Resolution – Specify your own resolution. o Calibration Expires – Set a reminder to popup when a calibration needs updating. Serendipity Blackmagic User Manual – Version 5.2 121