Download USER MANUAL

TOOL PATH
CHAPTER TEN
Fig10-71
You can scale the tool path by clicking Toolpath -> Toolpath Transform on the menu bar. When a
dialog is displayed, set the values in it, and then the tool path size is changed. After choosing base point,
checking change and setting scale of X, Y, Z, then press ok
2 Move
Fig 10-72
You can move the tool path by clicking Toolpath -> Toolpath Transform on the menu bar. Set the
value in the dialog, and then the tool path position is changed.
3 Rotate
Fig10-73
You can also rotate the tool path by clicking Toolpath -> Toolpath Transform on the menu bar.
10.17 Post Set
There are many type of CNC systems in the worldwide. The definition for G direction and M direction
in the different CNC systems are not quite similar, so that the requirement for command and format in NC
158