Download USER MANUAL

CHAPTER TWELVE
WAVE BOARD
Path space: the space between each tool path
Min depth: the min depth the tool goes into the board
Accuracy: the accuracy of the texture. The accuracy is better when the setting is lower, and the time
needed for calculating is longer.
Note: Overlap and the path space are the same. So you need to just set one of them when creating the
tool path.
Baseline setting (Fig. 10)
Height: the height of the z axis curve that is the depth of the tool going into the material.
Height = min depth + wave height
Width: the width of z axis curve
Fig. 10
Bamboo strip (Fig. 11)
Straight wave (Fig. 12)
Fig. 11
Fig. 12
12.3 Curvilinear texture
Click on wave board -> curvilinear texture, and a dialog is displayed. (Fig. 13)
192