Download OPERATING INSTRUCTIONS GB

Tyres should undergo conservation maintenance at least twice a year using the appropriate
preparations designed for this purpose. Complete wheels and tyres should be previously
carefully washed and dried. During longer storage of unused windrower it is recommended
that every 2 to 3 weeks the trailer may be moved a bit so that the place of contact of tyres
with ground is changed. So that tyres are not deformed and maintain proper geometry. Also
tyre pressure should be inspected from time to time, and if necessary pressure should be
increased to appropriate value.
5.4 LUBRICATION
Greasing of windrower shall be performed where indicated on figure (5.2A) as stipulated in
table (5.1). This procedure should be performed using a hand or foot operated grease gun
filled with generally available permanent grease. Before beginning greasing in so far as is
possible remove old grease and other contamination. Remove excess oil or grease
Oil in reduction gearing shall be changed after the first 50 hours, and then after 500 hours or
once a year of use. Detailed description of oil change and service of reduction gear is given
in section 5.1 "Service of reduction gear”
During windrower use the user is obliged to observe greasing instructions according to
attached schedule. Excess greasing substance causes depositing additional
contaminants in places requiring greasing, therefore it is essential to keep individual
machine elements clean.
5.5