Download LMF-400 Owners Manual

3. Select the desired option and press ENTER. The following message
will appear: Press Enter to reset Trip Fuel.
4. Press ENTER, which will reset the trip fuel and take you back to the
main display.
Reset Seasonal
A few sensors, like the Suzuki Engine Interface, EP-10 Fuel Flow and
EP-50 Storage Device keep a running total of fuel used for a season. By
using the Reset Seasonal command, you can reset to zero the running
total of fuel used for a season.
To reset seasonal fuel:
1. Press MENU, use the UP and DOWN keys to select SYSTEM SETUP and
press ENTER.
2. Highlight FUEL SETUP and p ress ENTER.
3. Select RST SEASONAL (Reset Seasonal) and press ENTER. The Select
Engine menu will appear with up to four options (Port, Center,
Starboard and All Engines), depending on the engine-tank
configuration you chose during Boat Setup. (If you have one engine, the
reset seasonal fuel message will appear.)
4. Select the desired option and press ENTER. The following message
will appear: Press Enter to reset Seasonal Fuel.
5. Press ENTER to reset seasonal fuel. You will be taken back to the
main display.
Customizing Pages
The customizing pages feature allows you to choose what data will be
displayed on selected pages. Pages that can be customized include:
Single Analog, Dual Analog, Quad Analog, Single Digital, Dual Digital,
Quad Digital, Fuel Manager and Trim Tab pages. The Engine Trim,
Engine Diagnostic, GPS Position and Synchronizer pages cannot be
customized.
NOTE:
Before a page can be customized it must be added to the page
screen rotation. (See the Adding Pages segment on page 13.) Once
it is in the rotation, scroll it onto the main display to access its
customize menu.
29