Download Part 5 Troubleshooting

Transcript
Troubleshooting
MCAC-VTSM-2011-09
3.20 "P9": Fan module protection
Outdoor Unit
Display
P9(V4+)
Error
Explanation
ODU displays P9. Only V4+ series system would display this code.
Supposed
Causes
1.
2.
3.
4.
Control box is too hot.
Fan is blocked or is defective or is not powered correctly.
Signal line is loose.
Fan module is defective.
Troubleshooting
P9: Fan module protection
Control box is too hot or
the heat exchange of fan
module is inefficient.
Check
the
heatsink's
temperature or move the
ODU to a cooler place.
Power lines and signal
lines of the fan module is
defective.
Check the lines and fasten
their terminal.
The fan's motor is blocked
or defective.
Clear away the block or
replace the fan's motor.
The power module of the
fan is abnormal.
Fan module is defective.
Replace the corresponding
power module.
Replace the fan module.
Remarks: If P9 occurs 3 times in 30 minutes, system will auto shut down and display H9 malfunction,
which can recover only by restarting the machine. At this time, malfunction should be promptly treated to
avoid further damage.
196
Troubleshooting