Download INSTALLATION MANUAL

Automatic Systems
3.9.3.
--
Removing the unit
Remove the fixing accessories from the barrier, then remove this from the concrete base.
3.10. Scrapping the equipment
•
When the equipment is withdrawn from use, proceed with the dismantling procedure as
described in paragraph [3.9. Temporary dismantling]. Do not fail, however, to empty the oil from
the gearbox and to scrap the various elements of the machine in the appropriate way (metal
parts, electronic components, etc.) in line with your country code/regulations.
 Automatic Systems BL26-GB
YD-XX
MQ-1302
30/11/95
Installation manual
1-1103GB
Rev.: B
p. 16/27