Download USER'S MANUAL

6. How to Repair the Machine
1) Adjusting the Height of the Needle Bar
2) Adjusting the Needle and the Shuttle
3) Adjusting the Lower Shaft Gear and the Rocking Shaft Gear
4) Adjusting the Position of Shuttle Upper Spring
5) Adjusting the Height of the Feed Plate
6) Adjusting the Height of the Presser Foot Devices
7) Adjusting the Presser Foot Devices
8) Adjusting the Parts for Thread Release
9) Adjusting the Wiper Parts
10) Adjusting the Parts for Trimming
11) Adjusting the Devices for Main Thread Adjustment
12) Adjusting the Winder Devices
13) Adjusting the Hand Pulley Device
14) Mounting the Direct Motor and Adjusting Method
15) Setting Up the X-Y Origin
7. Cause of Breakdown and Troubleshooting
1) Machine Part
24
24
24
25
25
26
26
26
28
30
31
33
33
34
34
35
36
36
8. Pattern List
37
9. Drawing of Table
39
10. Gauge List
40
11. Pneumatic Diagram
43
1) Drawing of the Pneumatic Hose of SPS/D-B1254 A-20, SPS/D-B1263 A-20 Machine
(for Monolithic Feed Frame)
2) Drawing of the Pneumatic Hose of SPS/D-B1254 A-22, SPS/D-B1263 A-22 Machine
(for Separately Driven Feed Frame)
43
44
5