Download INSTALLATION MANUAL

Transcript
GSW1
INSTALLATION MANUAL
10.14 RECEIVE CREDIT PARS PARAMETERS (PCREF)
By sending this command to GSW1 you receive SMS message with all currently programmed
credit parse parameters:
;PCREF;
10.15 RECEIVE CREDIT CHECK TELEPHONE NUMBERS (PCN)
By sending this command to GSW1 you receive SMS message with programmed numbers for
credit checking:
;PCN;
10.16 RECEIVE ALL CLIP PARAMETERS (PCLP)
By sending this command to GSW1 you receive SMS message with all currently programmed CLIP
functionality related parameters:
;PCLP;
NOTE
User can use ;PCLP=x,y; to limit the number of CLIP numbers to be printed.
x = start number
y = end number
Example
;PCLP=1,30; Prints first 30 CLIP numbers
10.17 STATE OF THE CREDIT FOR THE PREPAID CARD
By sending this command to GSW1 you receive SMS message with Credit amount on your prepaid
SIM card:
;PCCX;
Where X is the number of programmed prepaid card provider.
10.18 STATE OF THE OUTPUTS (PORC)
By sending this command to GSW1 you receive SMS message with current outputs state.
;PORC;
10.19 MANUAL GSM MODULE RESTART (MRES)
By sending this command to GSW1 shuts down GSM module and after a few second it switches the
power of the GSM module ON again. The unit reboots all parameters from the SIM card.
;MRES;
Page 32