Download INSTALLATION MANUAL
Transcript
GSW1 INSTALLATION MANUAL 10.14 RECEIVE CREDIT PARS PARAMETERS (PCREF) By sending this command to GSW1 you receive SMS message with all currently programmed credit parse parameters: ;PCREF; 10.15 RECEIVE CREDIT CHECK TELEPHONE NUMBERS (PCN) By sending this command to GSW1 you receive SMS message with programmed numbers for credit checking: ;PCN; 10.16 RECEIVE ALL CLIP PARAMETERS (PCLP) By sending this command to GSW1 you receive SMS message with all currently programmed CLIP functionality related parameters: ;PCLP; NOTE User can use ;PCLP=x,y; to limit the number of CLIP numbers to be printed. x = start number y = end number Example ;PCLP=1,30; Prints first 30 CLIP numbers 10.17 STATE OF THE CREDIT FOR THE PREPAID CARD By sending this command to GSW1 you receive SMS message with Credit amount on your prepaid SIM card: ;PCCX; Where X is the number of programmed prepaid card provider. 10.18 STATE OF THE OUTPUTS (PORC) By sending this command to GSW1 you receive SMS message with current outputs state. ;PORC; 10.19 MANUAL GSM MODULE RESTART (MRES) By sending this command to GSW1 shuts down GSM module and after a few second it switches the power of the GSM module ON again. The unit reboots all parameters from the SIM card. ;MRES; Page 32