Download Industrial Computing Solutions Fan-less Computer

Chapter 4: BIOS Setup
IDE Configuration
Primary IDE Master to Third IDE Master
This section is used to configure IDE devices.
When you enter the BIOS Setup Utility, the BIOS will auto detect the existing
IDE devices then displays the status of the detected devices. To configure
an IDE drive, move the cursor to a field then press <Enter>.
BIOS SETUP UTILITY
Advanced
ATA/IDE Configuration
Configure SATA as
[Enhanced]
[IDE]
► Primary IDE Master
► Primary IDE Slave
► Secondary IDE Master
: [TS64GSSD25S-S]
: [TS46GCFX500I]
Options
: [TOSHIBA MK167]
IDE Detect Time Out (Sec)
IDE Detect Time Out (Sec)
Options
IDE Configuration
Selects the time out value for detecting ATA/ATAPI devices.
Disabled
Compatible
Enhanced
BIOS SETUP UTILITY
Advanced
IDE Configuration
Disabled
Compatible
[35]
Enhanced
Select the time out value for
detecting ATA/ATAPI device(s).
[Enhanced]
[IDE]
ATA/IDE Configuration
Configure SATA as
←
↑↓ +/- Tab
F1
F10 ESC ► Primary IDE Master
► Primary IDE Slave
► Secondary IDE Master
Select Screen
Select Item
Change Field
Select Field
General Help
Save & Exit
Exit
IDE Detect Time Out (Sec)
v02.61 (C) Copyright 1985-2006, American Megatrends, Inc.
0
5
10
15
20
25
30
35
Options
: [TS64GSSD25S-S]
: [TS46GCFX500I]
: [TOSHIBA MK167]
[35]
←
↑↓ +/- Tab
F1
F10 ESC Select Screen
Select Item
Change Field
Select Field
General Help
Save & Exit
Exit
ATA/IDE Configuration
This field is used to configure the IDE drives. The options are Disabled,
Compatible and Enhanced.
v02.61 (C) Copyright 1985-2006, American Megatrends, Inc.
Configure SATA as
IDE
AHCI
This option configures the Serial ATA drives as Parallel ATA physical
storage device.
This option configures the Serial ATA drives to use AHCI (Advanced
Host Controller Interface). AHCI allows the storage driver
to enable the advanced Serial ATA features which will increase
storage performance.
Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved.
56
nTUF 600 User Manual