Download DrDAQ User's Guide

Transcript
Software information
3.2.2.3
37
drdaq_apply_fix
PREF1 void PREF2 drdaq_apply_fix (
short fix_no,
short value);
This procedure is used to modify the behaviour of the driver.
Arguments:
fix_no - the attribute to modify:
0: Temperature unit
1: pH compensation
value - the new value for the attribute:
If fix_no = 0 (set temperature unit):
0: Celsius
1: Fahrenheit
2: kelvin
If fix_no = 1 (select pH compensation):
0: Internal
1: External 1
2: External 2
3: None
4: Auto select between External 1 and Internal
Returns:
- none
3.2.2.4
drdaq_close_unit
PREF 1 void PREF2 drdaq_close_unit (
short port);
This routine closes the DRDAQ unit on the specified port.
Arguments:
port - the number of the parallel port
Returns:
- none
© Copyright 2005-7 Pico Technology Limited. All rights reserved.
drdaq.en