Download High Resolution Digital Audio Recorder with Time Code User Guide

Transcript
Logic Inputs
Configured as a switch-closure input, a pin can be connected to a switch that a user has wired to
assigned contact. This switch can then trigger the 744T to begin recording. Other functions can be
assigned as well from the Setup Menu. The switch-closure on a given pin of the CL-1 can be thought
of as just another key on the keyboard. Anything that can be assigned to a key can also be assigned
to a switch.
To configure a pin as an input, navigate to EXT KEYBOARD ASSIGN in the Setup Menu. Select a new
SHORTCUT number, then locate the Login inputs amongst the assignable keys. Choosing LOGIC IN 1
would correspond to pin 1 on the CL-1, LOGIC IN 2 would correspond to pin 2 on the CL-1, and so
on. After a Logic input is chosen assign the desired action that the Logic input will control.
Logic Outputs
Configured as a switch-closure output, the CL-1 can drive LEDs, relays, or any other sort of device
which will accept a TTL-level or similar input. For example, the CL-1 can drive a big red LED connected via a series resistor between the +5V output and a switch-closure output and light up whenever the recorder is put into record mode.
To configure a pin as an output, go to CL-1: LOGIC OUT ASSIGN in the Setup Menu. The Logic
Pin number is on the left hand side (“00”, “01”, etc). Each of these pins can be assigned to undefined, Stop, Play, Record, or Pause. Note that if a pin is assigned to be both an input (via the
EXT KEYBOARD ASSIGN Setup Menu) and an output (via the CL-1: LOGIC OUT ASSIGN Setup
Menu), the pin will automatically default to an output.
63