Download Installation Manual
Transcript
+00DE89409101_01EN_Telecon_IM.book Page 7 Thursday, May 21, 2009 3:04 PM Installation Manual TCS-NET GSM Phone Control Interface 3 Before Installation Specifications Media used Operation Global System for Mobile Communications (2G digital mobile phone communication system) Air conditioner control items Air conditioner ON/OFF control is designated by mobile phone SMS message. Air conditioner status acquisition items Air conditioner ON, OFF, and alarm status is notified by mobile phone SMS message. (Auto-notification is provided only when CN61 is used.) Operation/notification target Up to 5 numbers can be registered initially. telephone number Accessible telephone number TCB-IFGSM1E Power supply hardware Up to 5 numbers can be registered initially. Specified by AC adapter No external power supply is required when CN61 is used. Power consumption 1.1 W RS-232C connector Supports communication specifications (9600bps, non-parity, 8 bits, 1 stop bit, flow control provided/none) D-sub 9-pin male connector Protocol: Supports ETSI GSM 07.05, GSM 07.07, GSM 03.40, GSM 03.38 standard compliant SMS-related AT commands. Connector for the air conditioner Photocoupler HA connector specification, 12 VDC power input, alarm input CN3: HA connector (For CN08/CN09/CN22) CN4: For CN61 Operating temperature/ humidity 0 to 40°C, 20 to 85% RH Storage temperature -10 to 60°C Chassis material Plastic (nonflammable ABS resin UL-94V0) Dimensions 32 (H) × 80 (W) × 125 (D) mm Mass 150 g No. Line Description 1 RS-232C cable Type Straight-type cable with D-sub 9-pin male-female connectors Wire size Conforming to RS-232C Length Max. 15 m Type Multi-core wire Wire size Stranded wire (*1) 0.08097 to 3.309 mm² (AWG28 to AWG12) Length Max. 2 m (*2) 2 3 Indoor unit cable Power EN Specified by AC Adapter Not required when CN61 is used (*1) Thickness of insulator must be at least 1 mm. When the insulator is thinner than 1 mm, put the wire into a vinyl tube with insulator thicker than 1 mm. (*2) Varies with use environment and conditions. An AC adaptor unit required when connecting to the HA connector CN08/CN09/CN22 must be procured locally. The AC adaptor must meet the following requirements. –7– 6-EN Toshiba