Download Installation Manual

Transcript
+00DE89409101_01EN_Telecon_IM.book Page 7 Thursday, May 21, 2009 3:04 PM
Installation Manual
TCS-NET GSM Phone Control Interface
3
Before Installation
Specifications
Media used
Operation
Global System for Mobile Communications (2G digital mobile phone
communication system)
Air conditioner control items Air conditioner ON/OFF control is designated by mobile phone SMS message.
Air conditioner status
acquisition items
Air conditioner ON, OFF, and alarm status is notified by mobile phone SMS
message. (Auto-notification is provided only when CN61 is used.)
Operation/notification target Up to 5 numbers can be registered initially.
telephone number
Accessible telephone
number
TCB-IFGSM1E Power supply
hardware
Up to 5 numbers can be registered initially.
Specified by AC adapter
No external power supply is required when CN61 is used.
Power consumption
1.1 W
RS-232C connector
Supports communication specifications (9600bps, non-parity, 8 bits, 1 stop bit,
flow control provided/none)
D-sub 9-pin male connector
Protocol: Supports ETSI GSM 07.05, GSM 07.07, GSM 03.40, GSM 03.38
standard compliant SMS-related AT commands.
Connector for the air
conditioner
Photocoupler HA connector specification, 12 VDC power input, alarm input
CN3: HA connector (For CN08/CN09/CN22)
CN4: For CN61
Operating temperature/
humidity
0 to 40°C, 20 to 85% RH
Storage temperature
-10 to 60°C
Chassis material
Plastic (nonflammable ABS resin UL-94V0)
Dimensions
32 (H) × 80 (W) × 125 (D) mm
Mass
150 g
No.
Line
Description
1
RS-232C cable
Type
Straight-type cable with D-sub 9-pin male-female connectors
Wire size
Conforming to RS-232C
Length
Max. 15 m
Type
Multi-core wire
Wire size
Stranded wire (*1) 0.08097 to 3.309 mm² (AWG28 to AWG12)
Length
Max. 2 m (*2)
2
3
Indoor unit cable
Power
EN
Specified by AC Adapter
Not required when CN61 is used
(*1) Thickness of insulator must be at least 1 mm. When the insulator is thinner than 1 mm, put the wire into a vinyl
tube with insulator thicker than 1 mm.
(*2) Varies with use environment and conditions.
An AC adaptor unit required when connecting to the HA connector CN08/CN09/CN22 must be procured locally.
The AC adaptor must meet the following requirements.
–7–
6-EN
Toshiba