Download Description and operating instructions

Translated by R.Whitehead 16-9-2011 (my best effort – accuracy is not guaranteed)
13. Version history
Here you will find all firmware versions and the changes to the previous version.
You can find the current version of your GPS-Logger firmware with our software ―SM GPSKonverter‖ or the UniDisplay.
Version number
1.00
1.01
1.02
Date
10-2010
1.03
03-2011
1.04
08-2011
21 of 21
03-2011
Comment
First retail version
Internal test version
1. Minor bug fixes and enhancements
2. Autostart with 3D fix is now delayed for 10 s after the fix so
that the GPS start height can stabilize  in this time
orange and green shine.
3. Support for the .igc file format added so the GPS-Logger
can directly generate the files for the online Contest 9OLC)
(see section *)
1. Bug fixed in the distance calculation when using M-Link
telemetry.
2. 2. M-Link extended for the direct output of the values from
a connected UniLog, in addition maximum speed and
maximum altitude available as a separate sensor value.
1. Telemetry with Graupner HoTT added.
2. Adjustment to M-Link data logging for receiver firmware
1.20
3. The M-Link value ―Address‖ is now giving he direction to
the model instead of flight direction.
4. With M-Link the threshold and tones for climbing are
rethought, undesired values are suppressed to stop the
sounding of tones from the transmitter.
5. Jeti telemetry now supports the Jeti Expander E4.
6. The .igc filename was changed to the .igc defaults.
7. Autostop option inserted: terminates recording 10 s after
the landing.
8. Recording can arbitrarily be started again after stopping
(3D-Fix Start goes only one time).
9. Off-field landing mode: after landing and after 2 minutes
without movement the coordinates of the model are
transferred over telemetry
 Jeti and HoTT are changed to the correct screen
 with M-Link, Latitude and Longitude are dispalayed in
the addresses Vario and Speed in 5 seconds.
10. Min. and max. values of the current measurements can be
called up on UniDisplay, Jeti and HoTT.
11. Adjustment for data transfer from the UniLog 2