Download INSTALLATION MANUAL

7. Touch “Fold&Staple Pos. Adjustment.”
[If the crease deviates as shown below]
11. Using the
key, set the numeric value and
touch “END.”
A
4512IXE077DA
Exit direction
8. Touch “Fold Position Adjustment.”
4511IXC091DA
12.
13.
14.
15.
4511IXE104DA
9. Touch “A3
” and then touch “Normal Paper.”
4511IXE105DA
[If the crease deviates as shown below]
10.Using the
key, set the numeric value and
touch “END.”
A
Exit direction
4511IXC090DA
E-10
Touch “END.”
Touch “Exit” on the Service Mode screen.
Make a copy and check the crease for deviation.
Adjust the other sizes in the same way.