Download INSTALLATION MANUAL

8. Touch “Fold&Staple Pos. Adjustment.”
[If the staple positions deviate as shown below]
12. Using the
key, set the numeric value and
touch “END.”
A
4512IXE077DA
Exit direction
9. Touch “Center Staple Position.”
4511IXC094DA
13. Touch “Enter” three times.
14. Touch “Exit” on the Service Mode screen.
15. Make a copy and check the staple position for
deviation from the crease.
16. Adjust the other sizes in the same way.
4511IXE104DA
10. Touch “A3
” and touch “Normal Paper.”
4511IXE106DA
[If the staple positions deviate as shown below]
11. Using the
key, set the numeric value and
touch “END.”
A
Exit direction
4511IXC093DA
E-12