Download User's manual code MW6040

PART 3 - MAIN MENU
Survey
"Survey" is the function by means of which BABUC acquires, displays and stores data with
various different logic and procedures. Measurement can be performed with storage or without
storage. In both cases the acquired data can be displayed. Measurement without storage is the
default so if the operator requires data storage he must “make” the relevant setting.
During the Survey, you can select the options in the "UTILITIES" and "COMMUNICATION"
menus.
"K" Factor
Survey
The “K Factor survey” is the function that is used to set all the options to perform a survey to
calculate the wall or surface thermal conductivity factor. When BABUC is connected to wallmounted contact flowmeters (BSR240) and air and contact temperature probes, it displays and
stores a set of parameters relative to the “K factor”.
Comm.
"Communication" is the function that is used to change the communication options between
BABUC and PC or printer. The options are the following:
- Transmission speed (see "BIT RATE" in part 4)
- Messages regarding the communication protocol (see "PROTOCOL INFOS" in part 4)
- Protocol ID (See "PROTOCOL ID" in part 4)
Files
"Files" signifies the set of data stored during the surveys. The "Files" option enables the operator
to obtain certain information on available storage space and to delete unwanted information:
- Storage space available (see "MEMORY AVAILABILITY" in part 4).
- Index of stored surveys (see "SURVEY INDEX" in part 4)
- Deletion of the last stored survey (see "DELETE LAST SURVEY in part 4).
- Deletion of all stored surveys (see "DELETE ALL SURVEYS" in part 4).
24
BabucA / M User’s manual