Download User Manual - DIGITAL imaging

Dental Studio Plus®
Pag. 101
The state of the art for the modern dentists
window, it comes in the last position.
Start windows as “Modal”
This parameter, normally active, makes possible that every new open window blocks the
previous window. Opening the treatment window, for example, the main window will be
blocked till the close of treatment window. This option is usable only if you have more than one
monitor connected to the same computer.
Anyway we advise you against to utilize this option only if you are expert users of
Windows®.
Get incoming phone calls
Check the incoming phone calls number (only ISDN)
Using this function, Dental Studio Plus® will show you the incoming phone number and if the
number is associated to a patient card, it will show the patient name too. To use this function
is necessary to have these requirements: modem ISDN connected to ISND knob, incoming
phone calls identification service, active from your operator.
Waiting room management
This computer is the reception’s one
Check this option only on the reception’s computer and only if you want to manage the
waiting room. The computer that actives this function receive a message from the other
computer in the net, when they want to call a patient from the waiting room.
Remote control
At next start, the software will show the remote control (Pic. 8.3)
Pic. 8.3
© Copyright DIGITAL imaging sas – Via Alfieri 12 A B – 10142 Nichelino (TO)
www.digitalimaging.it
www.archimed.org
First edition: November 2006
Revision: May 2014