1
Download Operating Instructions - FTP Directory Listing
Transcript
Installing and Removing Interface Boxes Install a commercially sold SSD (Solid State Drive) in the AG-MBX10G removable interface box before use. For details, refer to “Interface Box Setup” (page 42). 1 2 Turn the unit off. 1 2 3 Turn the unit off. Slide the front door lock lever to open the front door. Slide out the interface box. Slide the front door lock lever to open the front door. ヱヰヸユ 3 Preparation Installing an Interface Box in the Unit Removing the Interface Box From the Unit ヶヴョヒ ャ ン ユヹリヵ ュユヷリヤ ユ ㄆヴモョビ ヵモ ョピ ヴユヵ ヴヵモン ヵ ヱビ ヴヵヰ ンモヨユ Insert the interface box in the interface box slot and slide it fully into the slot. ヱヰヸユ ヮユワ ヶ ヶヴョヒ ャ ン ユヹリヵ ュユヷリヤ ユ ㄆヴモョビ ヵモ ョピ ヴユヵ ヴヵモン ヵ ヱビ ヴヵヰ ンモヨユ ヮユワ ヶ 4 Close the front door. NOTE: •Always turn the unit off before removing the interface box. Removing the interface box when the unit is on, may damage the unit, the interface box or the SSD. 4 Close the front door. NOTE: •Always turn the unit off before installing the interface box. Installing the interface box when the unit is on, may damage the unit, the interface box or the SSD. 21
![取扱説明書[EH-NE16/NE26] (2.03 MB/PDF)](http://vs1.manualzilla.com/store/data/006558960_2-965bf0c3bcf2a7984eca9b6faf86c32d-150x150.png)
