Download Solution-16/ Solution-16 Safecom Installation Manual

88
Solution-16/Solution-16
Safecom Installation Manual
Converting ASCII Characters To Hexadecimal
To program an ASCII letter character and convert that to a number to be programmed, refer to “Table 37: Hexadecimal
Conversion Table" for converting letters and numbers to decimal numbers.
Example
If you need to program an Alpha Pager Password with the letter 'L' in upper case, you would then program that letter as: 4,12.
Hexadecimal Conversion Table
Hexadecimal Number
A
B
C
D
E
F
Decimal Number
10
11
12
13
14
15
Table 37: Hexadecimal Conversion Table
PET Alpha Pager ID Number
0000000000
LOCATION 530 - 539
The Pager ID Number locations are used to store the unique number which allows the network to identify individual pagers.
To program the Pager ID Number, enter the decimal characters that represent the Pager ID Number. Remember to substitute a 10
for a zero and to terminate the number with a zero as you would if you were programming the telephone numbers.
Note:
If the Pager ID Number is less than 7 digits, it must be prefixed with the digit 6 until the number of digits equal 7.
This is only relevant when using the PET format.
Example
If the Pager ID Number is 123456, it must be programmed as 6123456.
ISSUE210.DOC
Electronics Design & Manufacturing Pty Limited