Download User Manual

MAIN MENU
6)
PRIORITY (For AVC794C, AVC793C & 793CD Only)
This function is used to reallocate the system sources to live display, record, and remote access.
There are three options for this function: RECORD FIRST / NETWORK FIRST / DISPLAY FIRST.
RECORD FIRST:
When this option is selected, Full D1 at real-time record on all channels is available,
but the frame rate for remote monitoring will be decreased, and the VGA output
resolution is fixed to 1024 x 768.
NETWORK FIRST: When this option is selected, real-time remote monitoring will be available, but Full D1
real-time recording on all channels will not be available, and the VGA output resolution
is fixed to 1024 x 768.
DISPLAY FIRST:
When this option is selected, three VGA output resolutions will be available to choose
(1024 x 768 / 1280 x 1024 / 1600 x 1200), but Full D1 real-time recording on all
channels and real-time remote monitoring will not be available.
7)
RECORD CONFIG
Click “SETUP” to enter the setting page individually for manual record, event record and timer record.
a) Select the record type you want to set.
b) In “CHANNEL”, select “ALL” to apply the changes here to all channels.
QUICK START
MANUAL EVENT
TIMER
CHANNEL
IMAGE SIZE
ALL
CIF
I.P.S.
100
QUALITY
SUPER BEST
alarm shop
EXIT
Note: The I.P.S. section is taking the PAL system as an example.
Or, select “BY CHANNEL” to set the image size, image per second & image quality individually for each
channel.
QUICK START
MANUAL EVENT
CHANNEL
CH1
CH2
CH3
CH4
TIMER
IMAGE SIZE
CIF
CIF
CIF
FIELD
I.P.S.
25
25
6
25
QUALITY
SUPER BEST
SUPER BEST
HIGH
SUPER BEST
AVAILABLE IPS: CIF 69 / FIELD 34 / FRAME 17
APPLY
16
EXIT