Download Landis + Gyr EDC

3.2.3
Step 3 : Checking the metering values
Check whether the metering values have been stored in the EDC database.
Procedure
Display ⇒ Presentation ⇒ Data management ⇒ Input substitute values
A list of all current metering data in the database will be displayed:
Change the month and year to the load profile time range that was read out.
The raw value list should contain the values 1000_01 and 1000_02. The number 5000
corresponds to the database reference of the "Rigi Solaranlage“ RTU. The raw value list
contains two values if both metering values were imported.
Close the window by pressing Cancel.
3.3
Data acquisition from hand-held terminals
Data import will be illustrated using a sample file from a Landis+Gyr NORTI System.
A prerequisite is successful installation and commissioning as described in section 2
“Before You Start”.
The settings and configurations archived on the installation disk will be used for this
example.
3.3.1
Step 1: Copying the read-out route
Use the Windows Explorer to copy read-outs from a hand-held unit to the TRANSFER
directory.
Procedure
Copy the file "HTT_Route.abg" from the archive on the installation CD to directory C:\
EDC\TRANSFER\.
Users may also employ files from their own read-out system instead of the archived
sample file.
Landis+Gyr
EDC-S V3.5 1004 en
EDC User Manual
Quick start
3-7