Download SERVICE MANUAL Service Level 1&2
Transcript
nokia CONNECTING PEOPLE CMO Operations & Logistics WW Service Solutions & Development Bochum / Germany RH-64 PAGE 1 (20) Approved 1.0 DJk/MGR Confidential 23.06.2005 RH-70 Transceiver characteristics: • Band: Dual-band phone for GSM 900/1800MHz or 850/1900MHz (depends on Sales Area) • Display: High resolution color display with up to 65,536 colors (128 x 128 Pixels) Inverted black and white display (Nokia 1110 Only) • Vibra Alert: Onboard Vibra motor • Connector: Easy Flash connector Transceiver with BL-5c 900mAh Li-Ion battery pack Talk time Up to 5h Standby Up to 18days Note Depends on network parameters Environmental characteristics: • Lead-free soldered SERVICE MANUAL Service Level 1&2 Service Manual 1600/1110 Level 1&2 Copyright © 2005 NOKIA Corporation. All rights reserved. nokia CONNECTING PEOPLE CMO Operations & Logistics WW Service Solutions & Development Bochum / Germany PAGE 2 (20) Approved 1.0 DJk/MGR Confidential 23.06.2005 TABLE OF CONTENT Page 1. INTRODUCTION...................................................................................................................................................................................3 2. GENERAL REPAIR INFORMATION.....................................................................................................................................................4 3. PATHFINDER FOR WORKSHOP STAFF .............................................................................................................................................5 4. EXPLODED VIEW AND COMPONENT DISPOSAL .............................................................................................................................6 5. SPARE PARTS OVERVIEW ..................................................................................................................................................................7 6. SPARE PARTS LIST..............................................................................................................................................................................8 7. SERVICE TOOLS....................................................................................................................................................................................9 8. SW-UPDATE ...................................................................................................................................................................................... 11 9. DISASSEMBLY INSTRUCTIONS ....................................................................................................................................................... 12 10. LEGEND FOR QUICK TROUBLE SHOOTER................................................................................................................................. 15 11. QUICK TROUBLE SHOOTER PART 1.......................................................................................................................................... 16 12. QUICK TROUBLE SHOOTER PART 2.......................................................................................................................................... 17 13. GONOGO TEST ............................................................................................................................................................................. 18 14. BATTERY TEST ............................................................................................................................................................................. 18 15. FORWARDING OF REPAIRS ....................................................................................................................................................... 19 16. ESD PROTECTION REQUIREMENTS........................................................................................................................................... 20 CHANGE HISTORY Status Draft Approved Version No. 0.1 1.0 Service Manual 1600/1110 Level 1&2 Date 07.06.2005 23.06.2005 Comments Initial draft Approval Copyright © 2005 NOKIA Corporation. All rights reserved. nokia CONNECTING PEOPLE CMO Operations & Logistics WW Service Solutions & Development Bochum / Germany PAGE 3 (20) Approved 1.0 DJk/MGR Confidential 23.06.2005 1. INTRODUCTION The purpose of this document is to help NOKIA service levels 1 and 2 workshop technicians to carry out service to NOKIA products. This Service Manual is to be used only by authorized NOKIA service suppliers, and the content of it is confidential. Please note that NOKIA provides also other guidance documents (e.g. Service Bulletins) for service suppliers, follow these regularly and comply with the given instructions. While every endeavor has been made to ensure the accuracy of this document, some errors may exist. If you find any errors or if you have further suggestions, please notify NOKIA using the address below: mailto:[email protected] Please keep in mind also that this documentation is continuously being updated and modified, so watch always out for the newest version. Warnings and Cautions Please refer to the phone’s user guide for instructions relating to operation, care and maintenance including important safety information. Note also the following: Warnings: 1. CARE MUST BE TAKEN ON INSTALLATION IN VEHICLES FITTED WITH ELECTRONIC ENGINE MANAGEMENT SYSTEMS AND ANTI–SKID BRAKING SYSTEMS. UNDER CERTAIN FAULT CONDITIONS, EMITTED RF ENERGY CAN AFFECT THEIR OPERATION. IF NECESSARY, CONSULT THE VEHICLE DEALER/MANUFACTURER TO DETERMINE THE IMMUNITY OF VEHICLE ELECTRONIC SYSTEMS TO RF ENERGY. 2. THE HANDPORTABLE TELEPHONE MUST NOT BE OPERATED IN AREAS LIKELY TO CONTAIN POTENTIALLY EXPLOSIVE ATMOSPHERES EG PETROL STATIONS (SERVICE STATIONS), BLASTING AREAS ETC. 3. OPERATION OF ANY RADIO TRANSMITTING EQUIPMENT, INCLUDING CELLULAR TELEPHONES, MAY INTERFERE WITH THE FUNCTIONALITY OF INADEQUATELY PROTECTED MEDICAL DEVICES. CONSULT A PHYSICIAN OR THE MANUFACTURER OF THE MEDICAL DEVICE IF YOU HAVE ANY QUESTIONS. OTHER ELECTRONIC EQUIPMENT MAY ALSO BE SUBJECT TO INTERFERENCE. Cautions: 1. Servicing and alignment must be undertaken by qualified personnel only. 2. Ensure all work is carried out at an anti–static workstation and that an anti–static wrist strap is worn. 3. Use only approved components as specified in the parts list. 4. Ensure all components, modules screws and insulators are correctly re–fitted after servicing and alignment. 5. Ensure all cables and wires are repositioned correctly. Electrostatic discharge can easily damage the sensitive components of electronic products. Therefore every Service Supplier has to take care of all precautions, which are mentioned in the service level related “Service Partner Requirements”, available on NOKIA Online. Also see ESD Protection Requirements in this Service Manual. Service Manual 1600/1110 Level 1&2 Copyright © 2005 NOKIA Corporation. All rights reserved. nokia CONNECTING PEOPLE CMO Operations & Logistics WW Service Solutions & Development Bochum / Germany PAGE 4 (20) Approved 1.0 DJk/MGR Confidential 23.06.2005 2. GENERAL REPAIR INFORMATION In this section the technician will get some general hints how to carry out repairs: o To familiarize oneself with NOKIA product read the tutorials or user guide on www.nokia.com -->Support--> Phones, by selecting the Phone Model. Before starting the repair you must take care of ESD precautions like being in your ESD Protected Area and connecting your wristband. Use gloves to avoid corrosion and fingerprints. Protect windows and displays with a film to avoid dust and scratches. When cleaning the LCD Module any lint-free cloth can be used (e.g. Micro-Fibre cloth). When cleaning the pads you have to use a soft cloth/ESD brush and Isopropanol. It is not allowed to use a glass fiber pencil because it scratches the surface and will lead later on to corrosion. Mechanical parts (except shielding lids and bent parts), which didn’t repair the failure, can be reused, if they are not soldered. When removing the shielding lids make sure to replace them with new ones, otherwise the high-frequency leakage can have an influence on the device. Always use original NOKIA spare parts. Check the soldering joints of the parts, which are concerned regarding the indicated error (e.g. soldered connectors or switches) and resolder them if necessary (Level 2 only). Remove redundant soldering flux after repair. Meet the torque requirements when assembling the unit (see also the document “torques for transceiver assembly” on NOKIA Online). Always use your own equipment for testing where you are sure that it works. E.g. if the customer complains about charger function, please test the phone with your own charger to be sure if phone or charger causes the malfunction. A SIM card is needed for all GoNoGo tests. When doing the fault log entries, always note the Item code, which caused the malfunction. Also, fill in the appropriate part code from the assembly, if needed. Please be aware that some malfunctions could be software related and solved by an update. o There are several documents available on NOL, which have to be followed: o First, take care for the latest content pages of Service Bulletins, which are always available for each folder on NOKIA Online. This is also important to recognize, if existing documents have become invalid. o The service level indicator at the bottom of each document tells the appropriate destination. o o o o o o o o o o o o o o o Example: Downloads > Support Library > 1. 2. 3. 4. 5. 6. Instructions General Service Bulletins Product related documents Spare Part Service Bulletins Service Tools Service Bulletins Common Software Service Bulletins etc,… Please also check NOKIA Online (NOL) for latest news and files on a regular basis. Service Manual 1600/1110 Level 1&2 Copyright © 2005 NOKIA Corporation. All rights reserved. nokia CONNECTING PEOPLE CMO Operations & Logistics WW Service Solutions & Development Bochum / Germany PAGE 5 (20) Approved 1.0 DJk/MGR Confidential 23.06.2005 3. PATHFINDER FOR WORKSHOP STAFF In addition to the information in this Service Manual, there are several instructions and information, which have to be followed. Main documentation database is NOKIA Online with the purpose of serving different multimedia content, like video clips or interactive tutorials. It is mandatory to watch for newest technical and organizational information on a daily basis to be updated as required (see “Latest files in Support Library”). Every new information has to be processed and implemented as soon as possible. When logged into NOL you can also find needed information in different folder like: Support Library Phones Service Manuals Service Bulletins Software Repair Information Level 1&2 e-learning (former NOKIA CarePoint) on NOKIA Online Former NOKIA CarePoint content, such as • • • Online Troubleshooting Product information Videos – Disassembly/Assembly can be found on NOKIA Online NOKIA Online Care Services Training Phone Models Level 1&2 e-learning courses offer a quick overview of the NOKIA phone and support for how to repair and use the phone: Troubleshooting Disassembly & Assembly Overview & Guides Step-by-step instructions on how to Instructions how to disassemble Basic information about the locate and repair the most common and assemble the phone phone, features and technologies problems with the phone To reduce the server traffic it is recommended to download newest version of huge files like videos, Phoenix packages or Service Manuals only once and distribute it internally for further use. Service Manual 1600/1110 Level 1&2 Copyright © 2005 NOKIA Corporation. All rights reserved. nokia CONNECTING PEOPLE CMO Operations & Logistics WW Service Solutions & Development Bochum / Germany PAGE 6 (20) Approved 1.0 DJk/MGR Confidential 23.06.2005 4. EXPLODED VIEW AND COMPONENT DISPOSAL Recommendation for the ecologically friendly disposal of components. Colorized components show the different categories. See corresponding ITEM/CIRCUIT REF in the Spare Parts Service Bulletins on NOL. Service Manual 1600/1110 Level 1&2 Copyright © 2005 NOKIA Corporation. All rights reserved. nokia CONNECTING PEOPLE CMO Operations & Logistics WW Service Solutions & Development Bochum / Germany PAGE 7 (20) Approved 1.0 DJk/MGR Confidential 23.06.2005 5. SPARE PARTS OVERVIEW Service Manual 1600/1110 Level 1&2 Copyright © 2005 NOKIA Corporation. All rights reserved. nokia CONNECTING PEOPLE CMO Operations & Logistics WW Service Solutions & Development Bochum / Germany PAGE 8 (20) Approved 1.0 DJk/MGR Confidential 23.06.2005 6. SPARE PARTS LIST Please exchange this page (placeholder) with latest corresponding Service Bulletins (spare parts, SWAP units and service tools) from NOL! This will ensure, that you are using up-to-date order codes only. Therefore Service Bulletins have to be checked from NOL on daily basis. Service Manual 1600/1110 Level 1&2 Copyright © 2005 NOKIA Corporation. All rights reserved. nokia CONNECTING PEOPLE CMO Operations & Logistics WW Service Solutions & Development Bochum / Germany PAGE 9 (20) Approved 1.0 DJk/MGR Confidential 23.06.2005 7. SERVICE TOOLS FLS-4S incl. ACF-8, Driver and User Guide Dongle and flash device incorporated into one package, developed specifically for POS use. ACF-8 Universal Power Supply is used to power FLS-4S. Internal Battery BL-5C Inserted under the back cover, this Li-Ion 900 mAh battery provides power in a lightweight package. Travel Charger ACP-12 Small and lightweight charger for fast charging of your phone battery. Headset HS-7 Comfortable handsfree operation with a remote control button for answering and ending calls makes this headset convenient and easy-to-use. XCS-1 Service Cable is used to connect FLS-4S to SF-10 . SF-10 POS Flash Adapter is used in POS (Point of Sales) environment for software updating. It provides controlled supply voltage and necessary connections between the phone and the Flash Device. It substitutes for the phone’s standard battery during the software update. Service Manual 1600/1110 Level 1&2 Copyright © 2005 NOKIA Corporation. All rights reserved. nokia CONNECTING PEOPLE CMO Operations & Logistics WW Service Solutions & Development Bochum / Germany PAGE 10 (20) Approved 1.0 DJk/MGR Confidential 23.06.2005 Test Pins for Flash Adapter SF-10 RJ-79 Soldering Jig Lead-free Solder Wire Mandatory for lead-free products (Level 2 only). 0772040 NMP Standard Toolkit NOKIA opening tool SRT-6 NOKIA No. 0770431 Tonichi torque driver NOKIA No. 6901525 Hoya micro fibre cloth MX304 Dastex gloves S, M, XL Artilux goggles AH166 Wera bit T5 867/4TX 5x50 Wera 867/4 6IP; 50mm (Torx 6 PLUS®) Wera bit T6 867/4TX 6x50 Wera 867/1 5IP; 25mm (Torx 5 PLUS®) Wera bit T6 PLUS® 867/4TX 6IP Facom side cutter 416E Facom T5 driver SP.14032 Facom T6 driver SP.14033 Facom slot screwdriver AEF. 2x35.E Wetec tweezers 7abb SA-ESD Wetec tweezers 22 SA-ESD Wetec tweezers 13 SA-SMD ESD Wetec tweezers PSF SA-ESD Wetec ESD brush E1211 Kaiser Fototechnik airbrush 6315 Wetec dental tool DEM83266/0 RS Components Scissors 323-5732 Service Manual 1600/1110 Level 1&2 Copyright © 2005 NOKIA Corporation. All rights reserved. nokia CONNECTING PEOPLE CMO Operations & Logistics WW Service Solutions & Development Bochum / Germany PAGE 11 (20) Approved 1.0 DJk/MGR Confidential 23.06.2005 8. SW-UPDATE Flash Concept – (Point of Sales) To use FLS-4S Flash Dongle you have to follow the user guide inside the sales package. Please check always for the latest version of flash software, which is available on NOKIA Online. Easy Flash Concept Battery must be inserted during fleshing! 1- Easy Flash Cable CA-65DS 2- Dongle FLS-4S 3- Power supply ACF-8 4- Phoenix software POS Flash Concept 1- POS Flash Adapter SF-10 2- Service Cable CA-28DS 3- Flash Dongle FLS-4S 4- Power supply ACF-8 5- Phoenix software It is very important to follow this insertion and removal procedure, otherwise the contact pins of Flash Adapter will be damaged (only for POS Flash Concept). Insert the Flash Adapter SF-10 like a battery, start at the Battery Connector side. Now, push down the bottom side of the phone, do not use too much force. When removing the phone, always start from the bottom Now, take the unit away. side of the unit. Service Manual 1600/1110 Level 1&2 Copyright © 2005 NOKIA Corporation. All rights reserved. nokia CONNECTING PEOPLE CMO Operations & Logistics WW Service Solutions & Development Bochum / Germany PAGE 12 (20) Approved 1.0 DJk/MGR Confidential 23.06.2005 9. DISASSEMBLY INSTRUCTIONS 1.) Needed tools for disassembly and assembly. 2.) Protect the window with a film. 3.) Press the Release Button and remove the B-Cover. 4.) Use the SRT-6 to unlock the A-Cover on both sides. For Nokia 1600 only! 5.) Remove the A-Cover. Always start on the top side of the device when re-assembling the A-Cover. 6.) Remove the Keymat and protect the inner side of the window with a film. For Nokia 1110 only! For Nokia 1110 assembly only! 7.) Use SRT-6 to remove the Keymat and protect the inner side of the window with a film. 8.) Fit the Keymat to the A-Cover, paying attention to its correct position. Service Manual 1600/1110 Level 1&2 Copyright © 2005 NOKIA Corporation. All rights reserved. nokia CONNECTING PEOPLE CMO Operations & Logistics WW Service Solutions & Development Bochum / Germany PAGE 13 (20) Approved 1.0 DJk/MGR Confidential 23.06.2005 9.) Unscrew the six, Torx Plus® size 6 screws in the shown order. For assembly, use the reverse order and a Torx Plus® size 6 driver with a torque setting of 24Ncm. 10.) Lift the LCD Shielding while pressing on the LCD Module with a clean cloth carefully. 11.) Remove the LCD Shielding. 12.) Remove the Acoustic Channel. 13.) Protect the LCD Module with a film. 14.) Take care to the surrounding components when opening the LCD connector. 15.) Use the SRT-6 to open the LCD connector in the order shown. Take care to the flex foil of the LCD Module. 16.) Remove the LCD Module. Service Manual 1600/1110 Level 1&2 Copyright © 2005 NOKIA Corporation. All rights reserved. nokia CONNECTING PEOPLE CMO Operations & Logistics WW Service Solutions & Development Bochum / Germany PAGE 14 (20) Approved 1.0 DJk/MGR Confidential 23.06.2005 17.) Remove the Light Guide Assy. 18.) Lift the Engine Module a bit with the SRT-6 and remove it from the D-Cover Assy. 19.) The Antenna IHF Assy drops out when turning the D-Cover Assy. 20.) Press out the Easy Flash Connector by using the DC-plug. 21.) Remove the Microphone with the slotted screwdriver. Service Manual 1600/1110 Level 1&2 Copyright © 2005 NOKIA Corporation. All rights reserved. nokia CONNECTING PEOPLE CMO Operations & Logistics WW Service Solutions & Development Bochum / Germany PAGE 15 (20) Approved 1.0 DJk/MGR Confidential 23.06.2005 10. LEGEND FOR QUICK TROUBLE SHOOTER This legend is valid for all parts of the Quick Trouble Shooter Follow the steps until the problem is solved. If this doesn’t help, you are not authorized to go forward. Only marked components ( e.g. I002 ) can be changed. The start point of repair activities regarding the appeared fault symptoms. Follow the arrows step by step Pads or contacts: Check optical and mechanical condition particularly regarding to corrosion. Clean if necessary. Measure component for electrical functionality and change, if needed. (Level 2 only) Pads or contacts: Check optical and mechanical condition particularly regarding to corrosion. Clean with ESD brush only, if necessary. No more actions possible send product to the appropriate service supplier with higher service level. Service Manual 1600/1110 Level 1&2 Copyright © 2005 NOKIA Corporation. All rights reserved. nokia CONNECTING PEOPLE CMO Operations & Logistics WW Service Solutions & Development Bochum / Germany PAGE 16 (20) Approved 1.0 DJk/MGR Confidential 23.06.2005 11. QUICK TROUBLE SHOOTER PART 1 Service Manual 1600/1110 Level 1&2 Copyright © 2005 NOKIA Corporation. All rights reserved. nokia CONNECTING PEOPLE CMO Operations & Logistics WW Service Solutions & Development Bochum / Germany PAGE 17 (20) Approved 1.0 DJk/MGR Confidential 23.06.2005 12. QUICK TROUBLE SHOOTER PART 2 Service Manual 1600/1110 Level 1&2 Copyright © 2005 NOKIA Corporation. All rights reserved. nokia CONNECTING PEOPLE CMO Operations & Logistics WW Service Solutions & Development Bochum / Germany PAGE 18 (20) Approved 1.0 DJk/MGR Confidential 23.06.2005 13. GONOGO TEST After the optical check, a GoNoGo test has to be carried out if the unit has been unscrewed to guarantee the functionality of the phone. Please refer to the actual information on NOKIA Online. When using delivered tester support files, take care of the right setup according to the tester type and product type. Please refer to “Recommended Service Equipment” on NOKIA Online. Mobile Phone Tester 14. BATTERY TEST A battery tester lets you test the capacity of NOKIA batteries. Please refer to the actual information on NOKIA Online. http://www.astratec.co.uk/ Service Manual 1600/1110 Level 1&2 http://www.cadex.com/ Copyright © 2005 NOKIA Corporation. All rights reserved. nokia CONNECTING PEOPLE CMO Operations & Logistics WW Service Solutions & Development Bochum / Germany PAGE 19 (20) Approved 1.0 DJk/MGR Confidential 23.06.2005 15. FORWARDING OF REPAIRS When it is necessary to forward of repairs to appropriate service supplier with higher service level we recommend using the offered swap phone cartons as described in Spare Parts SB-004. Always Protect the window with a protection film. Put the unit under the stretch film. Add repair documentation e.g. filled-in service note into Fold the swap carton as shown in Spare Parts SB-004. the swap carton. There are two different sizes of swap cartons for common mobile phones. Service Manual 1600/1110 Level 1&2 Copyright © 2005 NOKIA Corporation. All rights reserved. nokia CONNECTING PEOPLE CMO Operations & Logistics WW Service Solutions & Development Bochum / Germany PAGE 20 (20) Approved 1.0 DJk/MGR Confidential 23.06.2005 16. ESD PROTECTION REQUIREMENTS Please refer to the NOKIA Online document Service Supplier Requirements in folder General instructions. USE Conductive bags and boxes USE ESD compatible service tools USE Conductive wastebaskets USE ESD gloves when handling PWBs/PCBs USE Cleaning material without changing el. Characteristics USE Grounded service equipment, i.e. soldering station USE ESD clothes such as coat or frock Service Manual 1600/1110 Level 1&2 NO Smoking NO Drinking NO Eating NO Dust NO Useless Items NO Normal pressured air for cleaning modules/displays Copyright © 2005 NOKIA Corporation. All rights reserved. Service Schematics Introduction nokia 1110/1600 IMPORTANT: This document is intended for use by authorized NOKIA service centers only. Exploded view and component disposal RH-70/RH-64 “Service Schematics” was created with focus on customer care. The purpose of this document is to provide further technical repair information for NOKIA mobile phones on Level 3/4 service activities. It contains additional information such as e.g. “Component finder”, “Frequency band table” or “Antenna switch table”. The “Signal overview” page gives a good and fast overview about the most important signals and voltages on board. Saving process time and improving the repair quality is the aim of this document. It is to be used additionally to the service manual and other training or service information such as Service Bulletins. All measurements were made using following equipment: Nokia repair SW Oscilloscope Spectrum Analyzer RF-Generator / GSM Tester Multimeter : : : : : Phoenix version 2005.12.5.90 Fluke PM 3380A/B Advantest R3162 with an analog probe Rhode & Schwarz CMU 200 Fluke 73 Series II Table of Contents While every endeavour has been made to ensure the accuracy of this document, some errors may exist. If the reader finds any errors, NOKIA should be notified in writing. Please send E-Mail to: [email protected] Page Frontpage UPP, UEM, Combo memory, Radio, SIM UI, Keyboard, Audio RF part Signal overview Component finder 1 2 3 4 5 6 Copyright © NOKIA This material, including documentation and any related computer programs is protected by copyright, controlled by NOKIA. All rights are reserved. Copying, including reproducing, modifying, storing, adapting or translating any or all of this material requires the prior written consent of NOKIA. This material also contains confidential information, which may not be disclosed to others without the prior written consent of NOKIA. Customer Care / Service & Support Readiness / Competence Transfer Team Copyright © 2005 NOKIA Only for training and service purposes Version: 1.0 12.07.2005 1110 RH-70/1600 RH-64 Board version: 1jv_50e Frontpage Page 1(6) ~4V Battery Connector VBAT GND B2 R2004 100R C1 XMIC(1:0) 1 4 2 3 10R C2331 1u0 4u7 32.768kHz GND GND C2405 47p GND 1 AUDIO(4) AUDIO(3) AUDIO(2) AUDIO(4:0) 6 GND Flash D3000 GENIO(0) GENIO(3) FLASHM 2Mx16 1.36V 16 A 1.8V C3031 100n GND A7 B1 D8 A5 A3 C1 B10 D3 VPP VIO VIO VIO GND GND GND GND B5 NC _WP _AVD _WE _OE VCL _RESET _CE RDY A2 A10 VCORE C2880 C2882 10n GENIO(23) MEMCONT(5) B4 A6 C10 C2881 100n C2883 C2884 100n 10n 1.8V GND VIO MEMCONT(0) MEMCONT(1) A4 B6 B9 A1 D10 10n MEMADDA(21) MEMADDA(22) B7 C2885 10n MEMCONT(6) MEMCONT(9) C2886 100n C2887 10n MEMCONT(7) MEMCONT(8) MEMADDA(0) ADDRESS/DATA I/O D9 C7 C6 D5 D4 C3 C2 C9 C8 D7 D6 C5 C4 D2 D1 MEMADDA(1) MEMADDA(2) MEMADDA(3) MEMADDA(4) MEMADDA(5) MEMADDA(6) MEMADDA(7) MEMADDA(8) MEMADDA(9) MEMADDA(10) MEMADDA(11) MEMADDA(12) MEMADDA(13) MEMADDA(14) MEMADDA(15) GND JTClk JTRst JTDI JTMS JTDO EMU0 EMU0 EMU1 C5 F8 E7 GenTest0 GenTest1 GenTest2 F7 M9 R10 L15 C11 F9 J12 F5 G3 M3 L3 M11 K2 C8 H15 R7 C6 D2 G2 L5 M6 L2 T10 L16 B11 R12 J5 B8 H16 GenIO0 GenIO1 GenIO2 GenIO3 VDDDSP1 VDDCORE2 VDDCORE3 VDDPDRAM1 VDDPDRAM2 VDDPDRAM3 VDDPDRAM4 VDDDSP2 VDDDSP3 VDDMCU VDDCORE1 VDDIO1 VDDIO2 VDDIO3/VIO VDDIO4 VDDA VSSDSP1 VSSDSP2 VSSDSP3 VSSMCU VSSMCU VSSCORE1 VSSCORE2 VSSPDRAM1 VSSPDRAM2 VSSIO1 VSSIO2 VSSIO3 VSSIO4 MEMADDA(0) MEMADDA(1) MEMADDA(2) MEMADDA(3) MEMADDA(4) MEMADDA(5) MEMADDA(6) MEMADDA(7) R9 N10 N12 T15 R15 M12 M13 K12 0 1 2 3 4 5 6 7 MEMADDA(8) MEMADDA(9) MEMADDA(10) MEMADDA(11) MEMADDA(12) MEMADDA(13) MEMADDA(14) MEMADDA(15) T9 M10 R13 R14 N15 P15 L13 M16 8 9 10 11 12 13 14 15 MEMADDA(16) MEMADDA(17) MEMADDA(18) MEMADDA(19) MEMADDA(20) MEMADDA(21) MEMADDA(22) K13 T11 N11 R11 L12 K15 T7 16 17 18 19 20 21 22 MEMADDA(24:0) MEMCONT(4) 1.8V PRODTP6 VPP R3030 4k7 E3030 MEMCONT(3) C3032 100n MEMCONT(9) J2814 GND J2817 P16 FlsRstX T12 N9 ExtWrX ExtRdX J2815 MEMCONT(0) MEMCONT(1) N8 Fls2CSX R8 T14 R16 N13 T8 K16 FlsBAAX FlsPS FlsAVDX FlsClk FlsCSX FlsRdy R2 M15 GenIO23 GenIO24 PURX SleepX SleepClk L6 M5 K5 EarData MicData F2 H3 UEMint CBusClk CBusDa CBusEnX M2 J2 J6 H5 GenIO31 GenIO30 GenIO29 GenIO26 G5 D3 G6 C2 IrTx IrRx K3 J3 MBusTx MBusRx H6 E3 FBusTx FBusRx H2 F3 DBusClk DBusDa DBusEn1X N3 P3 K6 AUDIODATA(0) AUDIODATA(1) J2803 AUDUEMCTRL(0) AUDUEMCTRL(1) AUDUEMCTRL(2) AUDUEMCTRL(3) 5 6 J2807 9 PUSL(2:0) AUDIODATA(0) AUDIODATA(1) J2812 N6 T4 RxID GenIO16 RxQD GenIO17 R5 M7 N7 R6 TxID GenIO14 TxQD GenIO15 AuxDa N5 R3 T3 R4 P2 GenIO13 GenIO5 GenIO6 GenIO7 GenIO8 GenIO9 GenIO10 GenIO11 GenIO12 10 IACCDIF(2) IACCDIF(3) IACCDIF(5:0) J2813 RFCONVCTRL(0) RFCONVCTRL(1) RFCONVCTRL(2) RFBusClk RFBusDa RFBusEn1X GenIO25 RFCONVDA(0) RFCONVDA(1) RFCONVDA(2) RFCONVDA(3) RFCONVDA(4) RFCONVDA(5) RFClk T6 VSSA M8 GenIO28 GenIO4 LCDCamClk LCDCamTxDa GenIO27 LCDCSX C7 C9 B7 E8 B6 E9 OSCIN OSCOUT GNDREGS2 F2 M7 VDAAUD1 VDAAUD2 EARP EARN N12 P12 P11 C2233 1u0 VIO 1.8V VCORE 1.36V VFLASH1 2.8V C2200 1u0 GND GND GND C2235 1u0 GND C2204 1u0 J8807 GND GND P8 N8 P9 J6 MICB1 MIC1P MIC1N MICSUB M11 M8 M10 N9 J7 HOOKINT MICB2 MIC2P MIC2N VSAAUD1 F8 F9 VDD18 VSS HEADINT HF HFCM VSAAUD2 M13 N11 N10 P13 VBATDRIV VIBRA BUZZO KDLIGHT VSADRIV1 VSADRIV2 J1 H1 H2 J2 H3 L1 C2205 1u0 J8808 AUDIO(0) AUDIO(1) GND B6 A7 J2205 J2206 PURX SLEEPX SLEEPCLK EARDATA MICDATA AUDUEMCTRL(0) AUDUEMCTRL(1) AUDUEMCTRL(2) AUDUEMCTRL(3) B9 A8 A9 B7 UEMINT CBUSCLK CBUSDATA CBUSENX ISIMIF(0) ISIMIF(1) ISIMIF(2) A4 B4 A3 SIMIODAI SIMIOCLKI SIMIOCTRLI IACCDIF(2) IACCDIF(3) B5 C4 MBUSTXI MBUSRXI IACCDIF(4) IACCDIF(5) A6 C5 FBUSTXI FBUSRXI RFCONVCTRL(0) RFCONVCTRL(1) RFCONVCTRL(2) B10 C10 B8 DBUSCLK DBUSDATA DBUSENX RFCONVDA(0) RFCONVDA(1) RFCONVDA(2) RFCONVDA(3) RFCONVDA(4) RFCONVDA(5) RFCONVDA(5:0) 2.8V 2.8V if radio activ GND R2205 10k VFLASH1 GENIO(15) VBATBB ~4V C2261 4u7 SLOWAD(0) SLOWAD(1) SLOWAD(5) SLOWAD(6) C2241 RFICCNTRL(0) RFICCNTRL(1) RFICCNTRL(2) GND C2242 C2220 R7635 1k0 C2240 1n0 1n0 10n 10n GND GND GND GND C7638 C7637 33p 1n0 GND GND B14 C11 C14 A12 B12 A13 RFCONCLK RXID RXQD TXID TXQD AUXD J8 VDAADC VANA C2287 10k R2205 100n GENIO(13) GENIO(5) GENIO(6) GENIO(7) GENIO(8) GENIO(9) GENIO(10) GENIO(11) GENIO(12) "TXP1" J2207 J2208 J2209 J2210 2.8V if radio activ VANA J2850 J13 H13 J15 J16 N2 N1 RFCONVCTRL(2:0) GENIO(17) GENIO(14) H12 F13 E15 F15 G13FMWrEn G12 G15 G16FMCtrlClk F16 FMCtrlDa VANA VIO VCORE VBB1 M4 D3 E3 N3 J8806 ISIMIF(2:0) J2810 GENIO(18) RFConvClk GenIO18 P6 GND XAUDIO(0) XAUDIO(1) XAUDIO(2) ~4V B1 B3 A2 B2 C2 F6 VDD28 G2 K13 L14 N14 N13 M14 L13 J9 BSI BTEMP KEYB1/MIC3P KEYB2/MIC3N VCXOTEMP PATEMP VSAADC GND P3 M5 M1 L3 N5 R7633 C2263 VBATVR1 VBATVR2 VBATVR3 VBATVR4 VBATVR5 100n 47k C2262 100n VSIM R2700 EMIF03-SIM02F2 C2208 1u0 "SIMIODAO" R1 "SIMCLK" R2 "SIMRST" R3 J3361 2.8V GND + FM-0035-C1 MBUS D1 PRODTP7U FBUSTXO FBUSRXO D2 F1 PRODTP2U VDACRX D13 VSACRX D12 RXIINP RXIINN RXQINP RXQINN F14 F13 G14 G13 VDACONVTX G9 VSACONVTX H9 PRODTP3U R2027 10k 1.8V/3V GND SIM Connector X2700 470191801 SIM Reader Side 1 2 3 "CLK" "RST" "VSIM" UI "I/O" 5 "VSIM" 6 "GND" 7 E2700 C2700 VFLASH1 VANA M KDL 11 100n C2239 100n GND VANA GND 2.8V if radio activ 2.8V if radio activ C2237 100n GND TXIOUTP TXIOUTN TXQOUTP TXQOUTN J14 J13 H13 H14 VREF N6 AFCOUT AUXOUT G12 H12 1u0 C2230 GND AFC J2992 RFAUXCONV(2) RFCONV(9:0) RFAUXCONV(0) GENIO1 GENIO2 GENIO3 GENIO4 GENIO5 C13 D14 E12 F7 E13 VR1 VR2 VR3 VR4 VR5 N4 K12 M2 L2 L12 RFAUXCONV(2:0) J2200 J2201 J2202 J2203 SLOWAD(6:0) RF part RFICCNTRL(2:0) J2204 RFCLK J8810 J8813 C2225 1u0 GND R6110 1k0 - GND C2236 100n VBATBB M2000 GND C2017 33p GND VSIM SIMIODAO SIMCLKO SIMRST SIMCARDDET SIMGND ~4V Vibra C2202 1u0 GND VBATBB AUDIODATA(3:0) IACCDIF(4) IACCDIF(5) J2811 GNDREGS1 GND C8 B13 C7 IACCDIF(0) IACCDIF(1) 8 VBATVANA VBATVIO VBATVCORE VBATVBB1 VBATVSIM AUDUEMCTRL(3:0) ISIMIF(0) ISIMIF(2) ISIMIF(1) J2809 J2808 N7 J2806 J2805 J2804 VIO PUSL(0) PUSL(1) PUSL(2) PUSL(0) PUSL(1) PUSL(2) 7 C2226 1u0 C2222 1u0 C2227 1u0 VR1 VR2 VR3 VR4 VR5 RF part 2.8V C2223 1u0 VAFR 0.8V if radio activ GENIO(25) GENIO(31:0) LCDUI(2:0) GND GENIO(28) UI KEY(10:0) GENIO(4) GENIO(27) GENIO(19) GENIO(20) GENIO(21) GENIO(22) GenIO19 GenIO20 GenIO21 GenIO22 E13 C16 D15 D16 P00 P01 P02 P03 P04 C12 E11 F11 C13 B14 0 1 2 3 4 P10 P11 P12 P13 P14 P15 B10 C10 E10 B12 F10 B9 5 6 7 8 9 10 2 1 0 J2818 MEMCONT(3) MEMCONT(4) MEMCONT(5) MEMCONT(6) MEMCONT(7) MEMCONT(8) LCDUI(2:0) J2823 GENIO(23) GENIO(31:0) C3030 10n NC NC VPP MEMADDA(16) MEMADDA(17) MEMADDA(18) MEMADDA(19) MEMADDA(20) MEMCONT(9:0) VIO 20 B2 A9 B8 A8 B3 E6 E5 B4 B3 C4 C3 D4 F6 C14 B15 F12 C15 GENIO(1) GENIO(2) TestMode 1.8V 4 J2802 R2203 100k J2849 GENIO(31:0) GND GND GND GND GENIO6 J2801 R2204 100k E2069 GND PROD TEST PATTERN GND E2062 8 7 E2063 E2066 3 6 E2067 2 J2060 R2068 22R R2070 5.6V/15V/0.05J J2063 E12 GND J2848 J2840 J2841 J2842 J2843 J2844 J2845 J2846 J2847 GND R2069 1k0 J2800 R2206 100k VIO (VPP) XAUDIO(6) XAUDIO(3) XAUDIO(4) XAUDIO(5) GND 1.8V D2800 UPP2M_V2.0_10X10 P7 VBG 2.8V if radio activ GND GND R2202 100k (TXD/FBUSTXO) UPP R2068 3 /4 22R R2068 4 /4 22R (DSP_MCUTEST) R2068 2 /4 22R (RXD/FBUSRXO) P4 G1 G3 P2 C1 VBATREGS 2.8V if radio activ GND Sleep mode = 0V Active mode = 1.8V (SCK/MBUS) PWRONX VANA GND C2203 1u0 VANA VANA 2 XAUDIO(0) C2011 1u0 E2 B2200 XAUDIO(2) S2409 R2010 100k TESTA TESTD J8805 R2200 0R22 K2 K3 GND VBATBB C2332 GND 10R A11 B11 VCHAROUT1 VCHAROUT2 100n Power switch C2010 10n GND ~4V C2007 GND XAUDIO(1) VCHAR R2011 J2012 42R/100MHz 2.0A R2011 C2009 10n VCHARIN1 VCHARIN2 L2000 RFCONV(3) RFCONV(2) RFCONV(1) RFCONV(0) 5/50V J2010 XMIC(1) C2008 10n 3pF version R2006 J2103 X2002 J2011 L2002 J2102 System Connector 2 1 3 F2000 RFCONV(4) 2 XMIC(0) 14V/50V R2008 XMICN XEARP HEADINT XMICP XEARN G6 H6 10n 4 RFCONV(7) RFCONV(6) RFCONV(5) L2001 1 UI XAUDIO(6:0) AUDIO(4:0) D2200 UEMCLITE_V2.2_WD_ENA GND C2012 GND 3 6 7 5 4 GND 33p UEM 8 9 10 11 GND X2002 C2330 GND C2002 150u_10V RFCONV(9) GND GND C2001 10p ~4V GND X2002 V2000 ESDA18-1F2 K A GND VBATBB J2004 GND R2013 5.6V/15V/0.05J C2006 22p VBATT BSI GND GND 14V/50V R2007 C2005 22p C2004 22p X2005 GND GND C3 14V/50V R2009 C2003 22p C2000 27p 47k R2001 A3 R2005 100R J2002 SLOWAD(1) A1 R2003 100R R2000 R2002 100R SLOWAD(0) 5/50V SLOWAD(0) R2020 ESDA14V2-4BF2 J2003 J2000 J2001 GENIO(24) Customer Care/ Service & Support Readiness / Competence Transfer Team Copyright © 2005 NOKIA Only for training and service purposes Version: 1.0 12.07.2005 1110 RH-70/1600 RH-64 Board version: 1jv_50e UPP, UEM, Combo memory, Radio, SIM Page 2(6) Keyboard 2.8V S2404 H2400 Left S2414 S2419 1 2 3 4 5 6 7 PDTA114EE ROW0 1.8V 8 9 10 UEM Send Right LCD Connector VFLASH1 V2401 KDL VIO Soft right 2.8V C2403 100n C2402 100n 3.6V GND Down Up S2403 VFLASH1 10k R2409 GND Soft left S2418 S2413 S2408 ROW1 GND 6 3 # 9 VLED"LCD_CLK" R2408 GND 0 1 2 S2402 "LCD_SDA" 220R R2407 "LCDCSX" 220R 7.5V S2407 ROW2 VLED+ R2406 2 UPP LCDUI(2:0) S2417 S2412 8 5 0 220R LCDUI(2:0) 4 S2421 "LCD_RESETX" S2406 S2401 S2416 S2411 ROW3 ~4V VBAT Action VOUT C1 VDD B1 A2 EN C2 IND B3 FB AGND A1 A3 NC PGND C3 C2400 1u0 GND GND Z2400 EMIF10-1K010F2 9 8 2 7 1 5 10 6 3 4 0 C2401 1u0 R4 R3 S2 R2 S1 R0 R5 R1 S3 S4 S0 IN1 IN2 IN3 IN4 IN5 IN6 IN7 IN8 IN9 IN10 * 7 S2400 V2400 N2400 TK65600B-G White LED driver for display/keyboard 4865501 LW_V18G-Q2T1-3K5L 22uH GND 4 1 L2400 GND S2415 S2410 S2405 ROW4 ROW4 ROW3 COL2 ROW2 COL1 ROW0 ROW1 COL3 COL4 COL0 OUT1 OUT2 OUT3 OUT4 OUT5 OUT6 OUT7 OUT8 OUT9 GNDOUT10 COL2 COL1 COL3 COL4 GND COL0 ~4V VBAT GND R2400 33R C2181 R2160 100k C2182 1u0 100n GND 2=GND 5=VBAT GND GND COM 4 NC 3 IN 6 NO 1 TS5A3159DCKR N2160 2=GND 5= VBAT AUDIO(4) C2157 100p B2100 HOT GND L2170 "MICP" 27p 2k2 C2164 27p R2153 C2151 33n 600R/100MHz GND C2164 2k2 GND R2156 Microphone R2153 C2151 33n NC 3 IN 6 NO 1 AUDIO(2) GND GND V2160 PDTC114EE AUDIO(3) 10R TS5A3159DCKR N2161 2x10k AUDIO(0) 2k2 C2152 10p KEY(10:0) COM 4 R1 R2151 R2 AUDIO(1) 10R R2155 GND GND UPP GENIO(31:0) 15 GENIO(14) Audio amplifier 14 AUDIO(4:0) UEM R2152 10k XMIC(1:0) XAUDIO(6:0) XMIC(0) C2161 100n R2150 1k0 GND 220R R2171 C2171 2u2 GND R2154 R2154 R2150 1k0 GND N2150 TPA2010D1YZF C2 2k2 XMIC(1) J2150 XAUDIO(6) XAUDIO(3) 2k2 C2165 1n C2165 1n C2155 33n XAUDIO(4) C2155 33n XAUDIO(5) XAUDIO(2) R2158 18k C2159 15n L2181 A1 C1 VBAT XAUDIO(1) R2159 18k C2180 15n Earpiece _SHDN B1 B2 IN+ INVDD PVDD Vo+ VoGND GND C3 A3 220R/100MHz A2 B3 220R/100MHz GND GND L2182 33nH L2183 33nH L2180 B2101 2 1 C2154 47p C2153 47p GND GND Customer Care/ Service & Support Readiness / Competence Transfer Team Copyright © 2005 NOKIA Only for training and service purposes Version: 1.0 12.07.2005 1110 RH-70/1600 RH-64 Board version: 1jv_50e UI, Keyboard, Audio Page 3(6) TXIP 4 R7610 5k6 TXIM 5 R7610 5k6 TXQP 6 R7611 5k6 7 R7611 5k6 RXIP 0 RXIM 1 J7600 12 2 C7610 10p C7627 56p 3 46 45 48 47 R7605 22R VR2 C7620 2u2 R7606 0R Z7602 EFCH942MTCC2.ES5 Out In C7644 L7602 942.5MHz Out GND C7645 560p C7607 1p2 L7603 24 10nH L7607 Z7600 EFCH1842TCC2 L7604 Out In 1842.5MHz Out 2n2H 2n2H R7632 39R C7604 0p5 GND L7605 C7657 22p 1p8 B7600 GND GND 26MHz 20 VC/TX ~1.98V ~1.58V A AX B BX PLLREFR CPLO VCCPRE VT VREG GNDVCO VCCVCO HUGIN C7639 270p 15 16 18 17 19 C1X C1 C2X C2 TX1 TX1X TX2 TX2X 40 41 42 43 27 28 29 30 31 32 34 35 RX1 TXRXCTRL1 RX1X TXRXCTRL2 RX2 TXRXCTRL3 RX2X VCCTX RX3 LOFISW RX3X RX4 RX4X VCCFE 39 38 37 44 6 7 8 10 VCXOEN VCCSC VCXO VDDSC VCXOX FSYS VCCLOGEN 2 3 9 11 4 VCCVCXOVDDPLL GNDVCXO TSTVCXO VCCBB R7617 100R UPP RFBUSDA 0 (RFICCNTRL 2:0) RFBUSCLK 15 OUT BGH92M 869.5MHZ GND C7613 C7641 1u0 270p C7669 3n9 GND Z7604 VCC IN1 IN2 OUT GND C7658 22p BGH182M 1710-1910MHz VR3 GND VR1 C7625 22p 12 GND 33 C7630 22p 36 GND C7668 22p 13 UEM GND 2.8V VR4 C7643 100n C7659 22p GND GND VR5 GND 1 C7634 100n C7624 100n 3 GND J7621 R2900 330R GND GND J7610 RFBUSX IN2 GND C7656 100n C7623 22p R7630 100k C7635 100n 1 100R 49,50,51,52,53,54,55,56,57,58,59,60,61= GND GND V7600 2 R7616 VCC IN1 GND C7614 4p7 GND R7615 100R J7609 Z7603 C7655 10p 5 14 GND J7608 C2900 1n0 RFCLK UPP BBY56-02W AFC R7631 18k 2 GND EN DA CLK 21 20 23 22 C7636 2n2H (RFAUXCON 2:0) 560p 10nH GND UEM GND PMB3258_V1.1 26 25 24 23 UEM R7609 12k N7600 C7628 56p C7611 C7612 10p 10p GND RF IC 16 J7602 J7603 RXQM TX VCO/TX 897.4MHz 3589.6MHz 1747.8MHz 3495.6MHz 14 J7601 RXQP VC/RX ~2.7V ~2.38V 13 3k3 (RFCONV 9:0) RX VCO/RX 942.4MHz 3769.6MHz 1842.8MHz 3685.6MHz R7663 4k7 UEM Channel 37 700 R7619 TXQM Band GSM 900 GSM 1800 GND R7704 1k0 C7700 R7700 1k0 33p GND R7705 1k0 C7701 R7701 1k0 33p GND R7706 1k0 C7702 R7707 1k0 33p GND R7720 1k0 Front End Module GND TXIN_LB 12 RXOOUT_LB 22 OL2 OL1 TXP 5 4 25 PA_ID TXIN_HB 10 RXOUT_HB VPC VREG VBAT_LB VBAT_HB GND VBAT_PC VC1 VC2 VC3 0R 870R RESNET_1DB R7711 3 VR4 26 23 18 7 R7703 0R 19 2.8V 5R77 C7726 22p GND GND 27 28 29 30 C7728 0p5 R7733 GND 22 GND J7604 100R C7727 10p R7732 GND 10k ~4V VBAT C7725 120p GND C7712 15p C7711 2u2 GND GND GND C7713 C7714 27p 27p (SLOWAD 6:0) GND GND 2 C7631 0p5 UEM 21 870R 15 ANT PATEMP R7709 5R77 870R GND RESNET_1DB R7714 870R N7701 6 1k0 33p N7700 RF3282E5.1 1 RF 2 G 3 G R2207 C7720 5 TXP 0 TXC UPP (GENIO 31:0) UEM (RFAUXCON 2:0) 17 18 GND Customer Care/ Service & Support Readiness / Competence Transfer Team Copyright © 2005 NOKIA Only for training and service purposes Version: 1.0 12.07.2005 1110 RH-70/1600 RH-64 Board version: 1jv_50e RF part Page 4(6) VIO=1.8V VFLASH=2.8V 1) 32.768kHz at B2200 in 2) 32.768kHz at B2200 in 3) RFCLK at J7621 4) Sleepclock at J2802 VLED+=7.5V 5) CBUSCLK at J2804 6) CBUSDA at J2805 7) CBUSENX at J2806 8) DBUSCLK at J2811 9) DBUSDA at J2812 10) DBUSENX at J2813 11) VSIM at C2208 12) RXIQ at J7600-J7603 24 VLED-=3,6V 23 14 15 13 21 13) RFBUSX at J7608 14) RFBUSDA at J7609 15) RFBUSCLK at J7610 22 16) TXIQ at J7600-J7603 20 17 17) TXC GSM900 PL19 at R7732 18) TXC GSM900 PL5 at R7732 19) TXP at J7604 3 18 20) 26MHz at B7600 12 16 VR5=2.8V 9 8 VR2=2.8V VANA=2.8V 10 6 4 21) 897.4MHz TX signal at R7709 22) 1747.8MHz TX signal R7703 23) 942.4MHz RX signal at L7606 24) 1842.8MHz RX signal at L7607 19 VR1=2.8V 5 7 1 VFLASH1=2.8V 2 11 VSIM VR3=2.8V VIO=1.8V VR4=2.8V VCORE=1.36V Customer Care/ Service & Support Readiness / Competence Transfer Team Copyright © 2005 NOKIA Only for training and service purposes Version: 1.0 12.07.2005 1110 RH-70/1600 RH-64 Board version: 1jv_50e Signal overview Page 5(6) B C2239 P5 C7644 J7 J2207 N4 J8808 M6 R2154 N7 V B2200 O7 C2240 M6 C7645 I7 J2208 N4 J8810 M6 R2155 L6 V2000 S7 B7600 K5 C2241 M6 C7655 I5 J2209 N4 J8813 M6 R2156 O7 V2160 L6 C C2242 M6 C7656 J5 J2210 N4 L Top R2158 N7 V2400 U5 C2000 G3 C2261 P6 C7657 K7 J2800 N4 L2000 T7 R2159 N7 V2401 U3 C2001 G2 C2287 M5 C7658 J7 J2801 N4 L2001 R3 R2160 L6 V7600 K6 C2002 G4 C2330 G2 C7659 I6 J2802 O4 L2002 R4 R2171 N8 Bottom X C2003 S5 C2331 P5 C7668 I6 J2803 N4 L2170 S3 R2200 P6 X2005 G3 C2004 R5 C2332 P5 C7669 K8 J2804 O4 L2180 M7 R2202 M7 X2060 T3 C2005 R5 C2400 U4 C7700 K3 J2805 O4 L2181 M7 R2203 M7 X2700 Q4 C2006 R5 C2401 U6 C7701 K3 J2806 O4 L2182 B6 R2204 M6 Z C2007 S7 C2402 C2 C7702 K4 J2807 O4 L2183 B6 R2205 M6 Z2400 Q3 C2008 R4 C2403 C2 C7711 I2 J2808 O4 L2400 U6 R2206 M7 Z7600 H6 C2009 R4 C2405 P5 C7712 I4 J2809 O4 L7602 I7 R2207 L4 Z7602 H7 C2010 R5 C2700 R4 C7713 I2 J2810 O4 L7603 I7 R2400 U5 Z7603 J5 C2011 S3 C2880 O4 C7714 K3 J2811 N4 L7604 I6 R2406 O2 Z7604 J5 C2012 R4 C2881 P3 C7720 K4 J2812 N4 L7605 I6 R2407 P2 C2013 R3 C2882 P3 C7725 K3 J2813 N4 L7607 H6 R2408 P2 C2017 G5 C2883 O2 C7726 J2 J2814 N3 M R2409 T4 C2151 N7 C2884 O2 C7727 K2 J2815 N3 M2000 G6 R2700 P4 C2152 S3 C2885 P3 C7728 K2 J2817 N3 C2153 B6 C2886 P3 D N R2900 K7 J2818 N3 N2150 M7 R3030 O2 C2154 B7 C2887 O2 D2200 O5 J2823 N4 N2160 L7 R7605 K7 C2155 N6 C2900 K7 D2800 O3 J2840 P4 N2161 L7 R7606 H7 C2157 O8 C3030 N2 D3000 M3 J2841 P4 N2400 T6 R7609 K6 C2159 N7 C3031 N2 F J2842 P4 N7600 J7 R7610 M5 C2161 N8 C3032 N2 F2000 T7 J2843 P4 N7700 J3 R7611 M5 C2164 N6 C7604 I6 H J2844 P4 R R7615 H8 C2165 N7 C7607 I7 H2400 C3 J2845 P4 R2000 G3 R7616 H7 C2171 N8 C7610 I8 J J2846 P4 R2001 Q3 R7617 H7 C2180 N7 C7611 I7 J2000 F2 J2847 O4 R2002 R5 R7619 J8 C2181 M7 C7612 I7 J2001 F3 J2848 O2 R2003 R5 R7630 K6 C2182 M7 C7613 I7 J2002 F3 J2849 O2 R2004 R5 R7631 K7 C2200 O7 C7614 J7 J2003 F2 J2850 M4 R2005 S5 R7632 K6 C2202 O7 C7620 K7 J2004 F3 J2992 M5 R2006 R5 R7633 K2 C2203 O7 C7623 J7 J2010 T6 J3361 P5 R2007 R4 R7635 K2 C2204 P5 C7624 J8 J2011 U4 J6161 Q7 R2008 S4 R7663 K8 C2205 P5 C7625 J6 J2012 T6 J6162 Q7 R2009 R4 R7700 I5 C2208 P4 C7627 J5 J2060 Q2 J7600 M5 R2010 S3 R7701 I5 C2220 M7 C7628 J5 J2063 Q2 J7601 M5 R2011 R4 R7703 J5 C2222 P7 C7630 K6 J2102 T4 J7602 M5 R2013 R5 R7704 K3 C2223 O7 C7631 D3 J2103 S4 J7603 N5 R2020 R5 R7705 K3 C2225 M6 C7634 I7 J2150 N4 J7604 O2 R2027 R5 R7706 K3 C2226 P7 C7635 K6 J2200 N5 J7608 I8 R2068 S2 R7707 I5 C2227 M6 C7636 K6 J2201 N5 J7609 H7 R2069 S2 R7709 I5 C2230 O7 C7637 K2 J2202 N5 J7610 H8 R2070 S2 R7711 J4 C2233 O7 C7638 K2 J2203 N4 J7621 K7 R2150 N7 R7714 J2 C2235 M7 C7639 J7 J2204 M5 J8805 M5 R2151 M7 R7720 K4 C2236 M5 C7641 J7 J2205 O4 J8806 N2 R2152 N7 R7732 K2 C2237 M5 C7643 K6 J2206 O4 J8807 O4 R2153 N7 R7733 K2 Customer Care/ Service & Support Readiness / Competence Transfer Team Copyright © 2005 NOKIA Only for training and service purposes Version: 1.0 12.07.2005 1110 RH-70/1600 RH-64 Board version: 1jv_50e Component finder Page 6(6)