Download User Guide - MAZDA lab

D A S H H A W K
I I
1.
Be sure the engine coolant temperature is at LEAST 158 degrees F. The DashHawk will check and will not let
you perform the procedure if this condition is not met.
2.
Set the Parking Brake and make sure the hood is closed.
3.
Turn the engine off for at least 10 seconds.
4.
PLACE YOUR FOOT FIRMLY ON THE BRAKE. This is VERY important, as the procedure will NOT
work if you do not have the brakes firmly engaged!
5.
Go to the Diagnostics Menu->GM Commands->CASE Relearn menu on your DashHawk.
6.
Start the vehicle and let the idle stabilize.
7.
Follow the prompts on the DashHawk screen. When ready, hit ENTER to initiate the process.
8.
When the DashHawk tells you to, steadily rev the engine up to approximately 4000 RPM until you feel the
engine stutter or “top out”.
9.
IMMEDIATELY back off the throttle and let it return to idle.
10. Check the DTCs and see if P1336 is present. If not, then the relearn procedure is complete.
1212-2