1
Download TMS320C3x C SOURCE DEBUGGER USER'S GUIDE
Transcript
Managing Data in Memory 7.4 Managing Data in Memory In mixed and assembly modes, the debugger maintains a MEMORY window that displays the contents of memory. For details concerning the MEMORY window, see the MEMORY windows discussion (page 3-12). MEMORY addresses 000000 0000004b 00000040 00000041 00000042 000005 00000043 00000044 00000045 00000046 00000a 00000047 00000048 00000049 0000004a 00000f 00000000 00000000 00000000 00000000 000014 00000000 00000000 00000000 00000000 000019 00000000 00000000 00000000 00000000 data The debugger has commands that show the data values at a specific location or that display a different range of memory in the MEMORY window. The debugger allows you to change the values at individual locations; refer to Section 7.3 (page 7-4), for more information. Displaying memory contents The main way to observe memory contents is to view the display in a MEMORY window. Four MEMORY windows are available: the default window is labeled MEMORY, and the three additional windows are called MEMORY1, MEMORY2, and MEMORY3. Notice that the default window does not have an extension number in its name; this is because MEMORY1, MEMORY2, and MEMORY3 are pop-up windows that can be opened and closed throughout your debugging session. Having four windows allows you to view four different memory ranges. The amount of memory that you can display is limited by the size of the individual MEMORY windows (which is limited only by the screen size). During a debugging session, you may need to display different areas of memory within a window. You can do this by typing a command or using the mouse. 7-6
