Download Mini-indicator User Manual

6-1
Specification Calibration
Parameter Code
Press
ENTER
⇒ Decimal Point
⇒ Maximum Weighing Capacity
⇒ Division 1
Select the desired
parameter code with
⇒ Division 2
⇒ Zero Tracking Setting
⇒ Unstable Detection Setting
Press
ENTER
The screen shows previous parameter setting.
Enter the desired parameter setting. Press
Press
ESC
ENTER
.
to escape the setting
ZERO
TA R E
⇒ Decrease the flash value by one
GROSS
NET
⇒ Move the cursor leftward
F2
ENTER
ESC
19
⇒ Increase the flash value by one
⇒ Move the cursor rightward
⇒ Save setting
⇒ Abort setting or exit
ZSME300000148