Download Technical manual. User manual

Normal mode and vice versa manually. To do this they must insert and remove their card from the lock two
consecutive times.
But the lock must allow this to happen. Consequently, we must select the field Can leave the door Opened or
Closed. If that field is selected, those authorised users will be able to change the mode manually. If it is not
selected, nobody will be able to change it, not even authorised users.
We select the field as in the screen below:
Therefore, the first change means: at 07H00MN the door will open automatically, and from that time
authorised users will be able to change the state from open to normal and vice versa manually.
If we leave the table as it is, the locks that follow it will be always open (unless an authorised user changes
their state manually), because we have not indicated another state change. This means that we need to include
another change to say when the lock will close and how the users who need to open that door will be able to
open it.
In the second change, then, the locks will return to the Normal state. We have said that the main door in our
example will close automatically at 22H00MN. We will specify that second change:
As that change must happen every day, we select all the days of the week including public holidays
In this second change we will not select the field Can
leave the door Opened or Closed. This means that every
day from 22H00MN the lock will operate in the normal
mode and nobody, not even authorised users, will be able
to change its operating mode.
Talleres de Escoriaza, S.A.U. – INHOVA SOFTWARE MANUAL
Página 39 de 127