Download Clearance Workbench User Guide

Transcript
ESKORT Clearance Risk Analysis 3.1
Clearance Workbench User Guide
Figure 118:
Path to Source File.
Click the Next >-button when you have selected to correct source file; hereby a new screen
is displayed (see Figure 119).
10.3 Step 3 – Configuring the Interpretation of the Source File
The screen (which is shown in Figure 119) shows how the content of the source file is
interpreted by the Data Loading Tool. It does that by displaying the contents in the Data
Preview-table.
10.3.1 Delimiters
Using the options in the Delimiters-group you can specify how the Data Loading Tool
shall distinguish between the columns in the source file. You can do that by specifying a
delimiter that the Data Loading Tool recognizes as the column separator. A delimiter is a
specific symbol such as semicolon, tab, etc. The system offers four standard delimiter
symbols, which are the most commonly used for this purpose; however if you need to use
another delimiter symbols the Data Loading Tool offers you the capability of entering
another (Other) symbol.
10.3.2 Consecutive Delimiters
There can be situations where a number of extra delimiters for some reason have been put
together in a row. E.g.:
7913;;;”James”
icdk/ECL/CWB/User Guide 3.1/v1.2/2011.11.15
117 (176)