Download Operating Instructions - VEGAPULS 62 standpipe version

11 Supplement
l
1 x closing cap ½ NPT, 1 x blind plug ½ NPT
or:
-
Double chamber housing
l
1 x plug (depending on the version), 1 x blind
stopper M20 x 1.5
l
1 x cable entry M20 x 1.5 (cable: ø 5 … 9 mm),
1 x blind stopper M20 x 1.5; 1 x blind stopper
M16 x 1.5 or optional5)1 x plug M12 x 1 for
external indicating and adjustment unit
or:
l
1 x closing cap ½ NPT, 1 x blind stopper
½ NPT, 1 x blind stopper M16 x 1.5 or
optionally6)1 x plug M12 x 1 for external
indicating and adjustment unit
or:
l
Spring-loaded terminals for wire cross-section
- Massive wire, cord
-
Stranded wire with end sleeve
1 x plug (depending on the version), 1 x blind
stopper M20 x 1.5; 1 x blind stopper M16 x 1.5
or optionally7)1 x plug M12 x 1 for external
indicating and adjustment unit
0.2 … 2.5 mm² (AWG 24 … 14)
0.2 … 1.5 mm² (AWG 24 … 16)
Indicating and adjustment module
Voltage supply and data transmission
through the sensor
Display
LC display in dot matrix
Measured value indication
- Number of digits
5
-
W x H = 7 x 13 mm (sensors with software ≥ 4.0.0,
hardware ≥ 2.0.0)
W x H = 5 x 8 mm (sensors with software ≤ 3.99,
hardware < 2.0.0)
Size of digits
Adjustment elements
4 keys
Protection rating
- unassembled
IP 20
-
mounted into the sensor without cover
Materials
- Housing
36508-EN-120301
-
IP 40
ABS
Inspection window
Polyester foil
5)
6)
7)
Only with Ex d version
Only with Ex d version
Only with Ex d version
VEGAPULS 62 standpipe version • 4 … 20 mA/HART - four-wire
51