Download Installation Manual

General description of installation
Installation Manual
2. General description of installation
Alamarin-Jet water jet propulsion units can be installed on a reinforced plastic,
aluminium, steel, polyethylene, or wooden boat.
Perform the installation in the following order:
1.
Attach the mounting template to the boat's hull (section 3. Installation
Methods, page 5).
2.
Attach the propulsion unit to the mounting template (section 4. Attaching
the propulsion unit, page 17).
3.
Install the control system (section 5. Installing the control system, page
37).
4.
Install the engine (section 6. Engine installation, page 47).
5.
Paint the propulsion unit with antifouling paint (section 7. Antifouling, page
49).
This is only necessary if the boat is used in waterways where organisms
are likely to attach themselves to the propulsion unit.
AM/245/EN/1.1.0
3