Download User Manual

3.2.3.2 Setup menu
Connect to 750TOBS:
Connect or disconnect
the 750TOBS
750TOBS parameters:
See sections 3.2.3.3 to
3.2.3.12
Force units: Choose
between mN or gram
User Interface: There are two
choices:
1. Controller. (described in Appendix
8. It is used when another software
package is used for acquisition.)
2. Acquisition & Controller.
Chambers: The window can also appear
by double clicking on the Y-axis.
Y-axis setting
Y-axis’ color
Axis and Grid: The window can also
appear by double clicking on the X-axis.
Change the settings for ‘Set. Temp’.
and ‘Volume’ in a choosen chamber.
X-axis’ color
If ‘All’ is checked, the changes will
be applied to all four chambers. (In
X-axis setting
Constant Wash Mode, the Volume
setting is changed to Flow, and units
to ml/min)
Comments setup: Up to 20 default comments can be saved. The window
can also appear by double clicking on the ‘Comments input field’.
User manual 750TOBS
Chapter 3
21