Download user guide - UK Whitegoods

Transcript
Starting The Machine
Once you have loaded the machine and placed the detergent in the correct compartment of the soap drawer or placed the detergent in the drum you are ready to close
the door and select your desired program.
use
Should the door not be closed correctly or hindered in some way the safety features
of the machine will not allow it to start and if this should happen then the start/pause
light will blink to indicate that the door is not correctly closed. Once closed the program and options can be set.
Simply select the desired program using the main program selector knob. As you do
this the start indicator will illumiate.
Select any options that you wish to use on that program and the corresponding indicators will light.
To begin the program now press the Start/Pause button once and the program will
start.
Changing The Program
If you have selected a program and wish to change it follow this procedure:
• Press the Start/Pause button
• Turn the program dial to the “O” (Off ) position
• Set the program dial to the desired program
• Press the Start/Pause button again to start the new selection
Cancel A Program
Should you wish to cancle a program follow this procedure:
• Press the Start/Pause button
• Turn the program dial to the “O” (Off ) position
• Set the program dial to the draining or spinning program
• The program ready light will illuminate
• Press the Start/Pause button again to drain and clear the program
Program End
Once the Program has ended the machine will automatically stop and the program
end light will be lit. Turn the program selector to the “O” (Off ) position to switch the
machine off.
19