Download user guide - UK Whitegoods
Transcript
Drainage Connection The machine should be connected using the fixed 1.5M drain hose to a suitable drainage point on your home plumbing. If this is not available or seems unsuitable you may require a plumber to alter your drainage point to suit an automatic washing machine. water out Should you require an extended drain hose to reach the drain point the maximum advisable length of hose is 2.5M, extending any further than this may cause issues with draining. It is vital that the drain hose is elevated within the guidelines shown in the diagram below. Failure to do so can cause “backfilling” where the machine can fill from the home plumbing causing malodourers and this is not covered by warranty • Be sure that water inlet and drain hoses are not folded, twisted, crushed or elongated by stretching • Water drain hose should be mounted at a height of minimum 60 cm, maximum 100 cm from the ground • The end of the drain hose may directly be fitted to the dirty water outlet hole or a special apparatus mounted on the outlet bracket of the wash-stand • Never attempt to extend the water drain hose by adding extra parts without advice from an engineer or installer, drain extension kits are strongly discouraged 3