Download User Guide - Honeywell

ST9120C Controls Layout
1
2
DT92E Controls Layout
3
4
5
6
EXTRA HOUR
OVERRIDE
NEXT
DAY
18
7
9
10
OK
DAY/TIME
PROGRAMME
HOLIDAY
2
3
4
7
10
8
The space below can be used to provide a record of boiler & system services and
the names and contact numbers of the Installer and Service Personnel.
9
This information is important for a Home Information Pack.
11
8 OFF/Standby Indicator
9 RF Communications Indicator
3 ECO Countdown Indicator
10 Battery Low Indicator
4 Heating Demand Indicator
11 Fault Indicator
10 Boiler Status Indicator
5 Setpoint Change Buttons
12 Setpoint Indicator
11 Slider
6 ECO Button
13 Temperature Display
3 Programme Time Markers
12 Operating Mode Indicator
7 OFF/Standby Button
4 Day of Week Indicator
13 Operating Mode Button
5 RF Symbol
14 OK/Next Button
6 ‘ON’ period indicator
15 Clock – and + Buttons
7 Extra Hour Button
16 Holiday Button
8 Indicator Lamp
17 Copy Day Button
Push button
9 Override Button
18 Next Day Button
Red light, indicator for special modes
or loss of communications
1 Time Display
2 LoT™ Technology Display
13
12
Keep this document in a Home Information Pack
0
35°C
5°C
18°C
11
2 Frost Protect Indicator
14
-3.0°C to 0 to 3.0°C
21 to 35°C
5 to 21°C
5 to 35°C
6
1 ECO Mode Active
15
DT92E Configuration
Measurement offset
Upper setpoint limit
Lower setpoint limit
Energy saving ECO setpoint
Factory Installer configured
setting (note value)
12
ST9120C
16
Options
5
RUN
NEXT
Configurable Features
13
8
COPY
DAY
17
1
CONFIGURATION & SERVICE DATA
Boiler & System Service Log
Service/Installation
Date
Installation/Service
Engineer
Telephone Number /
Contact Details
BDR91T Controls Layout
Green light, relay status indicator
This product and its associated documentation and packaging are protected by various intellectual
property rights belonging to Honeywell Inc. and its subsidiaries and existing under the laws of the UK
and other countries. These intellectual and property rights may include patent applications, registered
designs, unregistered designs, registered trade marks, unregistered trade marks and copyrights.
Honeywell reserves the right to modify this document, product and functionality without notice. This
document replaces any previously issued instructions and is only applicable to the product(s) described.
This product has been designed for applications as described within this document. For use outside of
the scope as described herein, refer to Honeywell for guidance. Honeywell cannot be held responsible
for misapplication of the product(s) described within this document.
Manufactured for and on behalf of the Environmental and Combustion Controls Division of Honeywell
Technologies Sàrl, ACS-ECC EMEA, Z.A. La Pièce 16, 1180 Rolle, Switzerland by its Authorised
Representative Honeywell Inc.
31