Download USER GUIDE V4

USER GUIDE
Systemline
Systemline
USER GUIDE
QED Audio Products Ltd,
Ridgeway House, Ridgeway Close,
Lightwater, Surrey GU18 5XU
Tel: +44 (0) 1276 451166
Fax: +44 (0) 1276 452211
Email:[email protected]
Internet:http://www.qed.co.uk
ZINS519
RHS
CONTENTS
PAGE
Component Overview
KMS in Detail
DMS in Detail
RHS in Detail
1
2
3-4
5
INSTALLED?
INSTALLED?
√
How to use this guide
√
Select Tuner
Returns to favourite station
Move up one Pre-set station
Move down one Pre-set station
√
Select and Play CD
Stop CD
Skip up track
Skip down track
Select Random Play
Skip up disc
Because Systemline offers many variations this guide has tick boxes to show which
variation is applicable to your installation. Your installer will fill these in for you.
INSTALLATION DETAILS
Systemline Controller Serial Number: ___________________________________
If Mini Disc is installed, Random and Disc Skip will have no function
Installer details:
Select and Play Tape
Stop Tape
Wind reverse
Wind forward
Down one channel
Up one channel
Stop Tape
Wind reverse
Wind forward
Pause Tape
Down one channel
Up one channel
Stop DVD
Scan reverse
Scan forward
Pause DVD
Track back
Track forward
Stop CD
Skip up track
Skip down track
No function
Select Random Play
Skip up disc
Returns to favourite station
Move up one Pre-set station
Move down one Pre-set station
No function
No function
No function
Select Satellite receiver
Installer contact name: _______________________________________________
Installer contact tel no: _______________________________________________
Source Equipment Details:
Source 1: _______________________________________________
Select and Play Video
Source 2: _______________________________________________
Source 3: _______________________________________________
Select and Play DVD
Source 4: _______________________________________________
Select and Play CD2
Select Tuner2
USER GUIDE 5
DMS
KMS - Source Selection & Volume
Volume
+ Increase volume
- Decrease volume
Mute speakers
Source Selection Keys
Press one of these
buttons to get sound
Stand-by (zone only)
5 second push = Power down (OFF)
INSTALLED?
KMS - Source Control Options
INSTALLED?
√
Control
√
√
Source
<
>
TUNER
Pre-set down
Pre-set up
Pre-set 1
CD
Track up
Track down
Stop
MD
Track up
Track down
Stop
TAPE
Back wind
Forward wind
Stop
SATELLITE
Channel up
Channel down
VCR
Back wind
Forward wind
Stop
DVD
Track up
Track down
Stop
Pre-set down
Pre-set up
Pre-set 1
Track up
Track down
Stop
CD2
USER GUIDE 2
2
2
ENGAGED*
SOURCE 1
Tunr
tunr
SOURCE 2
Cd
cd
SOURCE 3
Tape
tape
or
Sat
sat
SOURCE 4
Dvd
dvd
or
Tun2
tun2
or
Vcr
vcr
or
Cd2
cd2
*ENGAGED display is a courtesy notice to indicate that the source chosen
is being played in another zone already. It is still possible to change the
source but it may effect the listening pleasure of another zone.
Disc up
Volume is displayed from 0-63 (0=OFF). ie Vol 34
Time is displayed whilst system is in Stand-by. ie 13:21
Pause
Systemline
TUNER2
NORMAL
Disc up
(()) indicates that the paging has been activated
Mute indicates volume at zero (zone is still ON)
Stby indicates Stand-by mode (zone is OFF), this display is then followed
by the time display. ie 13:21
USER GUIDE
USER GUIDE 3
Systemline
SYSTEM OVERVIEW
Your Systemline installation will include some, if not all, of the following items:
USER GUIDE
To program alarm or change time* (assuming DMS is in Stand-by mode)
DISPLAY
BUTTON A
BUTTON B
Alarm ON
Alarm OFF
Advances
hours
Advances
minutes
Use Tuner
Use CD
Advances
hours
Advances
minutes
Keypad Module (KMS)
Used to select source and issue
commands to that source.
Enters alarm On/Off mode
Press
Alarm button
Enters alarm setting mode
Press
Alarm button
Enters source selection mode
Press
Alarm button
Enters clock setting mode
Press
Alarm button
Display Module (DMS)
Displays information about the
status of Systemline and also
receives commands from RHS
Exits set up mode
Press
Alarm button
*Clocks on dms displays will synchronise with the clock on zone a dms at 12:00
Remote Handset (RHS)
Issues commands to select
and control sources from the
comfort of your armchair.
Prime Zone (A)
Selected
(B) Sub Zone
Selected
If a zone splitter is installed within a zone to allow you to switch between a 2nd set of speakers
in a different room there will be an illuminated LED below the one or both of the two buttons
marked "A" and "B".
Systemline Controller S4.3
Nerve centre of the system. The
Controller should be left switched
on permanently, and once set up
by your installer it should need
no further adjustment.
The illuminated LED indicates that the speakers are active. It is possible to have pair "A" active
or pair "B" active or both. Note it is not possible to turn both pairs OFF so if you wish to switch
from pair "A" to pair "B" you must first activate pair "B" before being able to deactivate pair "A".
USER GUIDE 4
USER GUIDE 1