1
Download LC Meter User Guide for V1.2 PCB
Transcript
L/C Meter User Guide Page 7 of 41 LC Meter V1.2 Kit Assembly Instructions This section gives step by step instructions on assembling and testing the kit. It is not a difficult kit to build except for soldering the component connector which is a little tricky, but can be done even by a novice if the instructions are followed carefully. Most people should be able to build the kit in under 5 hours. Seasoned builders will only require 2 to 3 hours. There are no surface mount components (unless you count the component connector). If you have any questions or are unsure about what is meant by anything, please email [email protected] and we will be pleased to assist you. Step 1: Unpacking Your Kit Your kit should come in a sealed package as shown below. These instructions are for PCB V1.2. Please check that your kit label says PCB V1.2. Issue 3. Copyright © Debug Innovations Ltd 2009.
