Download Operating Instructions - Point Source Productions Ltd.
Transcript
Applicable input signals VIDEO input (VIDEO) Signal name 1 2 3 4 5 NTSC PAL PAL60 SECAM Modied NTSC Horizontal frequency (kHz) 15.73 15.63 15.73 15.63 15.73 Vertical frequency (Hz) 59.94 50.00 59.94 50.00 59.94 Shipping condition This function allows you to reset the unit to the factory setting. 1 2 SET UP Press to display the SET UP menu. Press to select “OSD LANGUAGE”. Press for more than 3 seconds. 3 Press to select “Shipping”. Press to display the Shipping menu. 4 1/2 SIGNAL SCREENSAVER EXTENDED LIFE SETTINGS INPUT LABEL COMPONENT/RGB-IN SELECT RGB POWER SAVE OFF ON PC POWER MANAGEMENT OFF DVI-D POWER MANAGEMENT ENABLE NO SIGNAL POWER OFF NO ACTIVITY POWER OFF DISABLE OSD LANGUAGE ENGLISH (US) Options Shipping Press to select “YES”. Shipping YES NO Press to conrm. 5 Wait for 10 seconds, and then turn the power off. [from the unit] 1 Press the MENU button till the SET UP menu is displayed. 2 Press the Volume Up “+” or Down “–” button to select “OSD LANGUAGE”. 3 Press and hold the ENTER button till the Shipping menu is displayed. 4 Press the Volume Up “+” or Down “–” button to select “YES”. 5 Press the ENTER button and wait for 10 sec. 6 Turn the power off. 49