Download Operating Instructions - Point Source Productions Ltd.

Transcript
Applicable input signals
VIDEO input (VIDEO)
Signal name
1
2
3
4
5
NTSC
PAL
PAL60
SECAM
Modied NTSC
Horizontal
frequency (kHz)
15.73
15.63
15.73
15.63
15.73
Vertical
frequency (Hz)
59.94
50.00
59.94
50.00
59.94
Shipping condition
This function allows you to reset the unit to the factory setting.
1
2
SET UP
Press to display the SET UP menu.
Press to select “OSD LANGUAGE”.
Press for more than 3 seconds.
3
Press to select “Shipping”.
Press to display the Shipping menu.
4
1/2
SIGNAL
SCREENSAVER
EXTENDED LIFE SETTINGS
INPUT LABEL
COMPONENT/RGB-IN SELECT
RGB
POWER SAVE
OFF
ON
PC POWER MANAGEMENT
OFF
DVI-D POWER MANAGEMENT
ENABLE
NO SIGNAL POWER OFF
NO ACTIVITY POWER OFF
DISABLE
OSD LANGUAGE
ENGLISH (US)
Options
Shipping
Press to select “YES”.
Shipping
YES
NO
Press to conrm.
5
Wait for 10 seconds, and then turn the power off.
[from the unit]
1 Press the MENU button till the SET UP menu is displayed.
2 Press the Volume Up “+” or Down “–” button to select “OSD LANGUAGE”.
3 Press and hold the ENTER button till the Shipping menu is displayed.
4 Press the Volume Up “+” or Down “–” button to select “YES”.
5 Press the ENTER button and wait for 10 sec.
6 Turn the power off.
49