Download OPERATING INSTRUCTIONS

DC CHARGING
1. Connect the DC charging adaptor to the charging jack of the worklight.
2. Connect the other end of the charger to the vehicle cigarette lighter
socket and charge for approximately one hour.
OPERATION
1. Press the on/off button to switch on the worklight.
• Up to 3 hours of light can be obtained before the batteries are
drained.
2. Press the on/off button again to switch the worklight off.
3. Attach the worklight to a suitable support using the folding hook or attach
to a ferrous metal surface using the magnetic retainer.
4. Never shine the light directly into anyones eyes.
CLEANING
To keep your worklight clean, wipe with a damp cloth only, DO NOT use
detergents, chemicals or harmful abrasives. Never immerse in water.
ENVIRONMENTAL PROTECTION
Do not dispose of this product with general household waste. All tools,
accessories and packaging should be sorted, taken to a recycling
centre and disposed of according to the laws governing Waste
Electrical and Electronic Equipment.
Parts & Service: 020 8988 7400/E-mail:[email protected] or [email protected]