Download primos 250 SR Operating Instructions

Transcript
Faults
7 Faults
ATTENTION
Risk of damage to the system if faults are remedied incorrectly.
 Make sure that faults are only ever remedied by specialist personnel.
There are two categories of system faults:
• Faults that are detected by the controller and trigger a fault message
• Faults that are not detected by the controller and do not trigger a fault message
7.1 Faults with fault message
In the event of faults with fault messages, the fault symbol will start flashing in the bottom
part of the display. The display backlighting will flash simultaneously.
 To switch off the flashing of the backlighting, press the
operating button.
Displaying fault messages
 To display the fault message, go to the "Info" menu.
 Use the operating buttons
and
to navigate until the fault message is displayed.
29